Investigation and Analysis of Stress and Deformation Monitoring of Long-Span Steel Roof Trusses

Structural stress and deformation monitoring and analysis were carried out for the 54 m long-span steel roof truss. To ensure the safety of the construction process, the stress and deformation of the steel roof trusses were monitored throughout the construction process. The numerical modeling of the structures with six different working conditions was carried out, and the points with the most critical values of stress and deformation were found. This work provides a theoretical basis for field monitoring during and after construction. The results show that the maximum vertical displacement of a steel roof truss during all modeled working conditions and the maximum measured displacement are within the Chinese building code’s requirements. The maximum value of stress found during analysis of the structure during the construction process and the maximum measured stress are much less than the yield stress. The structural stress remains in the elastic range. The reasons for the differences between the calculated and measured results were analyzed.

Cette oeuvre a été publiée sous la license Creative Commons Attribution 4.0 (CC-BY 4.0). Il est autorisé de partager et adapter l'oeuvre tant que l'auteur est crédité et la license est indiquée (avec le lien ci-dessus). Vous devez aussi indiquer si des changements on été fait vis-à-vis de l'original.