An Innovative Composite Wall Inner Tie System Applied to Reinforced Concrete Modular Integrated Construction

The application of reinforced concrete modular integrated construction (MiC) has gained popularity in Hong Kong, but challenges still exist in the temporary tying of side walls during composite wall construction. This paper presents an innovative inner tie system for composite walls, applied in a MiC project in Hong Kong. The system’s components are installed on the side walls of precast modules in the factory without the need to penetrate through the walls. After transport to the site, by rotating the loop on-site to engage the hook, the tying effect is achieved during on-site concrete pouring between the interstitial space of two modules. This system eliminates the use of tie bolts that penetrate precast side walls, allowing for comprehensive interior fitting-out in the factory and minimizing disruptions to internal decoration during on-site construction. The paper presents the system’s mechanism, nonlinear Finite Element Analysis (FEA) simulation, section size optimization, and validation through tensile and punching shear tests. Furthermore, an instrumented mockup module assembly was carried out, and the system was eventually applied in a real MiC project. The system can effectively control the horizontal deformation of MiC module side walls within a limit. Compared to current existing tying methods, this system offers easy installation, load-bearing reliability, adaptability to certain construction errors, savings on manpower and construction time, and also a decrease in construction waste and carbon emission. It will provide a valuable reference for future MiC projects.

Cette oeuvre a été publiée sous la license Creative Commons Attribution 4.0 (CC-BY 4.0). Il est autorisé de partager et adapter l'oeuvre tant que l'auteur est crédité et la license est indiquée (avec le lien ci-dessus). Vous devez aussi indiquer si des changements on été fait vis-à-vis de l'original.