• DE
  • EN
  • FR
  • Base de données et galerie internationale d'ouvrages d'art et du génie civil

Publicité

Influential Factors of the Static Shear Properties of Coral Mud in the South China Sea

  1. in Rock and Soil Mechanics, v. 38 (2017), p. 3127
  2. Wu Y. (2020), "Influence of Load Mode on Particle Crushing Characteristics of Silica Sand at High Stresses" in International Journal of Geomechanics, v. 20, n. 3, American Society of Civil Engineers (ASCE), p. 04019194

    https://doi.org/10.1061/(asce)gm.1943-5622.0001600

  3. in Geotechnical basis, v. 31 (2017), p. 226
  4. in Journal of Engineering geology, p. 208
  5. in Geotechnical foundation, v. 31 (2017), p. 321
  6. in Rock and Soil mechanics, v. 29 (2008), p. 2789
  7. in Rock and Soil mechanics, v. 30 (2009), p. 2043
  8. in Hydroelectricity, v. 45 (2019), p. 45
  9. in Journal of Shanghai University (Natural Science Edition), v. 20 (2014), p. 586
  10. in Journal of Huazhong University of Science and Technology, v. 19 (2002), p. 10
  11. in Journal of Geotechnical Engineering, v. 28 (2006), p. 343
  12. in Journal of Qinghai University, v. 36 (2018), p. 47
  13. Xiao Chengzhi (2017), "Effect of compaction degree and water content on performance of sandy silt" in Journal of Shenzhen University Science and Engineering, v. 34, n. 5, China Science Publishing & Media Ltd., p. 501

    https://doi.org/10.3724/sp.j.1249.2017.05501

  14. Wang Xing (2020), "Mechanical properties of calcareous silts in a hydraulic fill island-reef" in Marine Georesources & Geotechnology, Informa UK Limited, p. 1-14

    https://doi.org/10.1080/1064119x.2020.1748775

  15. in Journal of Geotechnical Engineering, v. 40 (2018), p. 22
  16. Brandon Thomas L. (2006), "Drained and Undrained Strength Interpretation for Low-Plasticity Silts" in Journal of Geotechnical and Geoenvironmental Engineering, v. 132, n. 2, American Society of Civil Engineers (ASCE), p. 250-257

    https://doi.org/10.1061/(asce)1090-0241(2006)132:2(250)

  17. in Rock and Soil Mechanics, v. 26 (2005), p. 1967
  18. in Journal of Geotechnical Engineering, v. 26 (2004), p. 659
  19. Mora C.F. (2000), "Sphericity, shape factor, and convexity measurement of coarse aggregate for concrete using digital image processing" in Cement and Concrete Research, v. 30, n. 3, Elsevier BV, p. 351-358

    https://doi.org/10.1016/s0008-8846(99)00259-8

  20. Hentschel Mark L. (2003), "Selection of Descriptors for Particle Shape Characterization" in Particle & Particle Systems Characterization, v. 20, n. 1, Wiley, p. 25-38

    https://doi.org/10.1002/ppsc.200390002

  21. in Journal of Geotechnical Engineering, v. 41 (2019), p. 195
  22. Xiao Yang (2014), "Strength and Deformation of Rockfill Material Based on Large-Scale Triaxial Compression Tests. I: Influences of Density and Pressure" in Journal of Geotechnical and Geoenvironmental Engineering, v. 140, n. 12, American Society of Civil Engineers (ASCE), p. 04014070

    https://doi.org/10.1061/(asce)gt.1943-5606.0001176

  23. Roscoe K. H. (1963), "Yielding of Clays in States Wetter than Critical" in Géotechnique, v. 13, n. 3, Thomas Telford Ltd., p. 211-240

    https://doi.org/10.1680/geot.1963.13.3.211

Publicité

  • Informations
    sur cette fiche
  • Reference-ID
    10433972
  • Publié(e) le:
    11.09.2020
  • Modifié(e) le:
    11.09.2020