0
  • DE
  • EN
  • FR
  • Base de données et galerie internationale d'ouvrages d'art et du génie civil

Publicité

Influence of the reinforcement corrosion on the bending moment capacity of reinforced concrete beams: a structural reliability approach

Auteur(s):


Médium: article de revue
Langue(s): anglais
Publié dans: Revista IBRACON de Estruturas e Materiais, , n. 3, v. 7
Page(s): 379-413
DOI: 10.1590/s1983-41952014000300005
Abstrait:

Reinforced concrete structures are, certainly, one of the most used types of structure around world. When it is located in non-aggressive environments, it respects, in general, the structural life predicted. Unless the structure be used improperly. However, the durability of these structures is strongly connected to degradation processes whose origin is environmental and/or functional. Among these processes, it is worth to mention those related to corrosion of reinforcements. The reinforcement's corrosion is directly related to the durability and safety of concrete structures. Moreover, the chlorides diffusion is recognized as one of major factors that triggers the corrosion. Therefore, at modelling accurately the chloride diffusion, the corrosion of reinforcements can be better evaluated. Consequently, design criteria can be more realistically proposed in order to assure safety and economy into reinforced concrete structures. Due to the inherent randomness present on chloride diffusion and corrosion, these phenomena can only be properly modelled considering probabilistic approaches. In this paper, the durability of a beam designed using the criteria proposed by ABNT NBR 6118:2003 [1] is assessed using probabilistic approaches. The corrosion time initiation is determined using Fick's diffusion law whereas Faraday's corrosion laws are adopted to model the steel loss. The probability of structural failure is determined using Monte Carlo simulation. The mentioned beam is analysed considering different failure scenarios in order to study the influence of water/cement ratio and environmental aggressiveness on the probability of failure. Based on these results, some remarks are performed considering NBR recommendations and the real probability of failure.

Structurae ne peut pas vous offrir cette publication en texte intégral pour l'instant. Le texte intégral est accessible chez l'éditeur. DOI: 10.1590/s1983-41952014000300005.
  • Informations
    sur cette fiche
  • Reference-ID
    10413493
  • Publié(e) le:
    12.02.2020
  • Modifié(e) le:
    12.02.2020
 
Structurae coopère avec
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine