0
  • DE
  • EN
  • FR
  • Base de données et galerie internationale d'ouvrages d'art et du génie civil

Publicité

Influence of Organic Matter Content on Engineering Properties of Clays

Auteur(s): ORCID
ORCID
ORCID
ORCID
Médium: article de revue
Langue(s): anglais
Publié dans: Advances in Civil Engineering, , v. 2021
Page(s): 1-11
DOI: 10.1155/2021/6654121
Abstrait:

Most natural sedimentary clay contains organic matter, and even a small amount of organic matter will have a great impact on the physical and mechanical properties of clay. In order to clarify the influence of organic matter content on clay soil, the illite-quartz mixture was mixed with natural amorphous peat soil (organic matter content is 50%) in different proportions for studying the influence of different organic matter contents on the physical properties (specific gravity,Gs; moisture content,; void ratio,e; liquid limit,; plastic limit,; plasticity index,Ip) and shear characteristics (cohesion,c; friction angle,φ) of clay soil. The experimental results found that, with the change of organic matter content, the specific gravity and void ratio of clay changed linearly, while the water content, Atterberg limit, shear strength, cohesion, and friction angle changed nonlinearly with the increase of organic matter content. Moisture content and Atterberg limit have a turning point when OC = 7.5%. Shear strength, cohesion, and friction angle all have obvious turning points when OC = 7.5% and OC = 37.5%. The variation of moisture content and Atterberg limit with organic matter content indicates that OC = 7.5% may be the limit value for the different forms of organic matter in the clay. When OC ≤ 7.5%, the organic matter in clay is in the bound state; when OC > 7.5%, the bound organic matter reaches saturation; and the free organic matter gradually increases. The change law of shear strength characteristics with organic matter content shows that the interaction between minerals and organic matter exhibits different shear characteristics under different organic matter content. When OC ≤ 7.5%, clay shows mineral properties, when 7.5% < OC ≤ 37.5%, clay shows mineral-free organic matter properties, and when OC > 37.5%, clay shows free organic matter properties.

Copyright: © 2021 Yue Gui et al.
License:

Cette oeuvre a été publiée sous la license Creative Commons Attribution 4.0 (CC-BY 4.0). Il est autorisé de partager et adapter l'oeuvre tant que l'auteur est crédité et la license est indiquée (avec le lien ci-dessus). Vous devez aussi indiquer si des changements on été fait vis-à-vis de l'original.

  • Informations
    sur cette fiche
  • Reference-ID
    10578375
  • Publié(e) le:
    02.03.2021
  • Modifié(e) le:
    02.06.2021
 
Structurae coopère avec
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine