0
  • DE
  • EN
  • FR
  • Base de données et galerie internationale d'ouvrages d'art et du génie civil

Publicité

The Influence of Natural and Synthetic Fibre Reinforcement on Wood-Gypsum Composites

Auteur(s):




Médium: article de revue
Langue(s): anglais
Publié dans: The Open Construction and Building Technology Journal, , n. 1, v. 11
Page(s): 350-362
DOI: 10.2174/1874836801711010350
Abstrait:

Objective:

This paper studies the influence of natural and synthetic fibres on the mechanical behaviour of recycled wood-gypsum composites. These composites of wood waste, such as wood shavings and sawdust, were tested using different proportions of each type of recycled wood. The fibres used, straw as a natural fibre and glass fibre as a synthetic fibre, were analysed in two different proportions.

Method:

The experimental procedure was based on the analysis of the physical properties, density and mechanical properties, flexural strength and compression of the reinforced mixtures. Water absorption by capillarity and the thermal behaviour of the new wood-gypsum materials were also studied.

Results and Conclusion:

The results show that the use of both types of fibres in the mixtures produces lighter composites, and reinforcement by glass fibre represents a significant increase in their flexural strength.

Copyright: © 2017 Rodríguez-Liñán Carmen, Morales-Conde María J., Rubio-De-Hita P., Pérez-Gálvez F., Pedreño-Rojas Manuel A.
License:

Cette oeuvre a été publiée sous la license Creative Commons Attribution 4.0 (CC-BY 4.0). Il est autorisé de partager et adapter l'oeuvre tant que l'auteur est crédité et la license est indiquée (avec le lien ci-dessus). Vous devez aussi indiquer si des changements on été fait vis-à-vis de l'original.

  • Informations
    sur cette fiche
  • Reference-ID
    10381088
  • Publié(e) le:
    22.11.2019
  • Modifié(e) le:
    02.06.2021
 
Structurae coopère avec
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine