Influence of Nano-Silicon Dioxide in the Enhancement of Surface Structure of Public Filler and Properties of Recycled Mortar

This paper proposes a method of enhancing public filler (PF) with nano-SiO2 (NS) to prepare modified recycled aggregate mortar (RAM). The improvement effect of NS solution at different concentrations and immersion times on the macroscopic physical properties of recycled public fine aggregates (PFA) was investigated. Moreover, the effect of NS on the basic physical properties and durability of recycled mortar (RM) and the reinforcement mechanism of NS on recycled mortar was analyzed through various techniques. Results indicated that the modification effect of NS could remove loose cement mortar from the surface of PFA. It reacted with calcium hydroxide and calcite to generate nano-particles that could fill pores in PFA. The water absorption rate of PFA decreased to 9.3% when immersed in 2% NS solution for 72 h. There was no significant improvement in the mechanical properties of RM when the solution concentration and immersion time were increased. However, the compressive strength of RM prepared by modifying PFA with 2% NS was increased by about 21.9%, and the capillary water absorption and electric flux were reduced by 56.3% and 15.1%, respectively. Micro-analysis results showed that the volcanic ash effect of NS enabled it to react with Ca(OH)2 adhered to the surface of PFA, generating C-S-H and improving the interfacial bonding of PFA. Moreover, NS adsorbed on the surface of PFA dispersed into the freshly mixed cement slurry, which further enhanced the internal structure of PFA.

Cette oeuvre a été publiée sous la license Creative Commons Attribution 4.0 (CC-BY 4.0). Il est autorisé de partager et adapter l'oeuvre tant que l'auteur est crédité et la license est indiquée (avec le lien ci-dessus). Vous devez aussi indiquer si des changements on été fait vis-à-vis de l'original.