The Influence of Fly Ash and Slag on the Mechanical Properties of Geopolymer Concrete

The use of geopolymer as a cementitious material for geopolymer concrete (GPC) is beneficial for the sustainable development and green transformation of the construction industry. Geopolymer concrete has many advantages, such as high strength, heat and corrosion resistance, low hydration heat, and carbon emissions. This paper adopted the water–binder ratio, alkaline activator modulus, and slag replacement as the influencing factors, and used the 28-day compressive strength and flexural strength of geopolymer concrete as the response values to seek a reasonable mix design. In addition, through microstructure analysis, the mechanism of geopolymer on concrete was studied. The results indicated that as the water–binder ratio increased, the compressive strength first increased and then decreased, while the flexural strength continuously decreased. As the amount of slag replacement increased, the compressive strength and flexural strength would also increase. The effect of alkaline activator modulus on compressive strength and flexural strength was not significant. Through response surface methodology (RSM) analysis, the optimal design of geopolymer concrete was determined to have a water–cement ratio of 3.50, a modulus of 1.54 for alkaline activator solution, and a slag substitution rate of 47%. The microstructure analysis showed that the water–binder ratio and slag replacement improved the pore structure and density of concrete, thereby enhancing the macroscopic mechanical properties of concrete. This paper can provide a theoretical basis for the application of geopolymer concrete in engineering.

Cette oeuvre a été publiée sous la license Creative Commons Attribution 4.0 (CC-BY 4.0). Il est autorisé de partager et adapter l'oeuvre tant que l'auteur est crédité et la license est indiquée (avec le lien ci-dessus). Vous devez aussi indiquer si des changements on été fait vis-à-vis de l'original.