0
  • DE
  • EN
  • FR
  • Base de données et galerie internationale d'ouvrages d'art et du génie civil

Publicité

In-use conditions of air-tightening materials applied in the air gap of ventilated building envelope constructions: A parametric study for different European climates

Auteur(s):


Médium: article de revue
Langue(s): anglais
Publié dans: Journal of Physics: Conference Series, , n. 1, v. 2654
Page(s): 012108
DOI: 10.1088/1742-6596/2654/1/012108
Abstrait:

Materials used in the building envelope have to withstand a wide range of varying and harsh conditions over their life cycle. Particular relevance falls upon the materials used for tightening buildings, such as wind barriers and tapes, as air infiltration was found to be responsible for between 10 and 30 % of heat losses of different national building stocks in Europe. However, there is large uncertainty about the conditions a material is exposed to over a building’s service life. A validated, hygrothermal model of a zero emission office building in Trondheim, Norway was simulated with 10-year climate files from different European locations: Bergen (NO), Berlin (DE), Oslo (NO), Paris (FR), Rome (IT), Tromsø (NO), and Trondheim (NO). This was done to investigate the temperature and humidity conditions in the ventilated air gap. The results show the total and median values for temperature in the ventilated air gaps of the simulated building’s walls and roof for the investigated locations. Moreover, the maximum change compared to the previous hour and the distribution of hours in 5 °C temperature and 10 % relative humidity intervals of the roofing underlay and wall to the west are reported.

Structurae ne peut pas vous offrir cette publication en texte intégral pour l'instant. Le texte intégral est accessible chez l'éditeur. DOI: 10.1088/1742-6596/2654/1/012108.
  • Informations
    sur cette fiche
  • Reference-ID
    10777746
  • Publié(e) le:
    12.05.2024
  • Modifié(e) le:
    12.05.2024
 
Structurae coopère avec
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine