0
  • DE
  • EN
  • FR
  • Base de données et galerie internationale d'ouvrages d'art et du génie civil

Publicité

Auteur(s):






Médium: article de revue
Langue(s): anglais
Publié dans: RILEM Technical Letters, , v. 7
Page(s): 199-208
DOI: 10.21809/rilemtechlett.2022.168
Abstrait:

Concrete is one of the most used materials after water. Largely owing to this, its environmental impact is substantial, although its embodied carbon per unit volume or mass is low when compared to most alternatives. This, along with the broad availability, good strength, durability and versatility of concrete means that it will remain a material of choice, although more efficient ways of using it must be found. Structurally optimized building components are a means to do this as they can save about 50% material. Unfortunately, however, such elements are presently too expensive to produce owing to them requiring non-standard formwork. It is an objective of digital fabrication to propose solutions to this issue. In this con-text, Digital Casting Systems (DCS) have advanced material control strategies for setting-on-demand in digital concrete processing. Thereby, the formwork pressure is reduced to a minimum, which opens possibilities of rethinking formworks as systems that are dynamically shaping, millimetre thin or weakly supporting the material cast inside. In this paper we present a brief overview of millimetre thin formworks and summarize the first realization of concrete elements that utilizes the mechanics of paper folding to make millimetre thin formworks up to 2.5 meters high. Such formworks could initially be flat packed, erected into shape, and eventually peeled-off and recycled in established material streams. This would reduce waste and transport cost, while offering a surface finish that meets the expectations for exposed concrete surfaces.

Copyright: © Ena Lloret-Fritschi, Joseph Choma, Fabio Scotto, Anna Szabo, Fabio Gramazio, Matthias Kohler, Robert J. Flatt
License:

Cette oeuvre a été publiée sous la license Creative Commons Attribution 4.0 (CC-BY 4.0). Il est autorisé de partager et adapter l'oeuvre tant que l'auteur est crédité et la license est indiquée (avec le lien ci-dessus). Vous devez aussi indiquer si des changements on été fait vis-à-vis de l'original.

  • Informations
    sur cette fiche
  • Reference-ID
    10715873
  • Publié(e) le:
    21.03.2023
  • Modifié(e) le:
    10.05.2023
 
Structurae coopère avec
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine