Improved softened truss model of prestressed concrete box girders subjected to combined bending and torsion

Prestressed concrete (PC) box girder is an innovative structure that is widely used in large-span bridges. Under eccentric loads such as vehicles, PC girders are inevitably under combined bending and torsion. To study its bending-torsional behavior, a refined full-range analysis model based on the combined action softening truss model (CA-STM) was proposed, where a simple and effective solution procedure and failure criteria were provided. The equilibrium equation, initial estimation equation for torque, and material constitutive model were modified by considering the prestressing effect to improve the CA-STM. An optimized algorithm was also employed to simplify the solution procedure instead of the traditional trial-and-error method, thus increasing the solution rate and stability. The theoretical curves predicted from the improved CA-STM exhibited great agreement with the available experimental results, and the predicted cracking and ultimate loads were also close to the experimental values. Hence, the improved CA-STM can reasonably predict the full-range mechanical response and failure modes of PC box girders subjected to combined bending and torsion, which provides great support to the design evaluation of such bridges.