0
  • DE
  • EN
  • FR
  • Base de données et galerie internationale d'ouvrages d'art et du génie civil

Publicité

Identification of Tension Force in Cable Structures Using Vibration-Based and Impedance-Based Methods in Parallel

Auteur(s):
ORCID
ORCID
ORCID
Médium: article de revue
Langue(s): anglais
Publié dans: Buildings, , n. 8, v. 13
Page(s): 2079
DOI: 10.3390/buildings13082079
Abstrait:

For cable structures, the tension force is one of the main factors showing the structure’s health. If the tension force falls below a safe level during construction or operation, it can lead to partial or complete the structural failure, posing a risk to the people’s safety. In this study, a parallel structural health monitoring approach of the vibration-based and impedance-based methods is proposed to identify the tension force in cable structures. Firstly, a cable structure including the anchorage is simulated using a finite element model to obtain the vibration and impedance responses. The numerical results are verified with the experimental ones of the previous studies. Then, the parallel approach combining the above two methods is presented to determine the tension force. For the vibration-based method, the tension force is estimated by the natural frequencies. For the impedance-based method, the tension force is estimated by the mean absolute percentage deviation (MAPD) index and the artificial neural network (ANN). Finally, the tension force estimation results are compared and assessed. By using the parallel approach, the reliability and accuracy of the tension force identification results are guaranteed.

Copyright: © 2023 by the authors; licensee MDPI, Basel, Switzerland.
License:

Cette oeuvre a été publiée sous la license Creative Commons Attribution 4.0 (CC-BY 4.0). Il est autorisé de partager et adapter l'oeuvre tant que l'auteur est crédité et la license est indiquée (avec le lien ci-dessus). Vous devez aussi indiquer si des changements on été fait vis-à-vis de l'original.

  • Informations
    sur cette fiche
  • Reference-ID
    10737657
  • Publié(e) le:
    02.09.2023
  • Modifié(e) le:
    14.09.2023
 
Structurae coopère avec
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine