A hybrid wave vibration energy harvester with electromagnetic double-speed and piezoelectric up-frequency driven by a rotating ball
Auteur(s): |
Shengyao Jia
Chuanjun Zeng Ge Shi Jubing Xu Yinshui Xia Wentao Zeng Xiudeng Wang Huakang Xia |
---|---|
Médium: | article de revue |
Langue(s): | anglais |
Publié dans: | Smart Materials and Structures, mai 2024, n. 6, v. 33 |
Page(s): | 065023 |
DOI: | 10.1088/1361-665x/ad49f1 |
Abstrait: |
The energy crisis and environmental pollution have driven the development of ambient energy harvesting technologies, and ocean waves usually contain abundant vibration energy, making the study of wave energy harvesting technology of profound value. This paper proposes a hybrid wave vibration energy harvester with electromagnetic double-speed and piezoelectric up-frequency driven by a rotating ball. For the electromagnetic generator (EMG), the excitation magnet and coil move simultaneously, resulting in double the flux variation rate compared with traditional structures, enhancing the output voltage. For the piezoelectric transducer (PZT), four piezoelectric cantilever beams are magnetically coupled with the EMG, generating power through bistable motion and broadening the working frequency band of the cantilever beam structure. The harvester is modeled and simulated, and its performance is tested on a simulated vibration platform, with simulation and experimental results in good agreement. Under external excitation at 0.8 Hz, the optimal load and maximum power for each EMG are 8.2 Ω and 207.2 mW, respectively, and the optimal load and maximum power for each PZT are 100 kΩ and 1.52 mW, respectively. The harvester can produce a maximum output power of 420.48 mW, demonstrating high efficiency in energy capture under low-frequency and multidirectional wave excitation. |
- Informations
sur cette fiche - Reference-ID
10783903 - Publié(e) le:
20.06.2024 - Modifié(e) le:
20.06.2024