Geotechnical Evaluation of Clayey Soil Contaminated with Industrial Wastewater
Auteur(s): |
M. O. Karkush
T. A. A. Al-Taher |
---|---|
Médium: | article de revue |
Langue(s): | anglais |
Publié dans: | Archives of Civil Engineering, mars 2017, n. 1, v. 63 |
Page(s): | 47-62 |
DOI: | 10.1515/ace-2017-0004 |
Abstrait: |
The impacts of industrial wastewater contamination on the geotechnical properties of clayey soil have been studied in the research presented in this paper. The contaminant in question is industrial wastewater released from Thi-Qar oil refinery as a by-product of production, and the soil samples obtained from Thi-Qar oil refinery plant in Al-Nassyriah (a city located in the south of Iraq). The geotechnical properties of contaminated soil samples were compared with those of intact soil to measure the effects of such a contaminant. The soil samples were obtained from three locations in the study area; representing the highly contaminated area, the slightly contaminated area, and the intact area used as a reference for comparison of test results. The results of the tests showed that the contaminant causes an increase of natural moisture content, field unit weight, Atterberg’s limits, and maximum dry unit weight, as well as an increase of the compression index and the coefficient of vertical consolidation. Also, the contaminant causes a decrease in specific gravity, the optimum moisture content initial void ratio, the swelling index, the coefficient of permeability, and cohesion between soil particles. |
- Informations
sur cette fiche - Reference-ID
10476794 - Publié(e) le:
25.11.2020 - Modifié(e) le:
25.11.2020