0
  • DE
  • EN
  • FR
  • Base de données et galerie internationale d'ouvrages d'art et du génie civil

Publicité

Full-Field Strain Characterizations and Fracture Process of Rock Blasting Using a Small-Scale Double-Hole Bench Model

Auteur(s):




Médium: article de revue
Langue(s): anglais
Publié dans: Advances in Civil Engineering, , v. 2020
Page(s): 1-13
DOI: 10.1155/2020/8649258
Abstrait:

A small-scale double-hole bench model is designed with granite to study the fracture mechanism of rock blasting. By combining high-speed camera and digital image correlation, the full-field strain characterization and fracture process of the specimen bevel surface are investigated. The preliminary test results show that the strain concentration zone corresponds to the crack propagation location, and digital image correlation can well detect the crack propagation. In addition, through observing the crack propagation pattern on the specimen bevel surface, it can be seen that the fracture of the specimen is caused by the dominant horizontal crack and the dominant vertical crack, and the generation of the dominant horizontal crack takes precedence over that of the dominant vertical. Finally, the measurements of two-dimensional digital image correlation and three-dimensional digital image correlation are discussed.

Copyright: © Jun Yang et al.
License:

Cette oeuvre a été publiée sous la license Creative Commons Attribution 4.0 (CC-BY 4.0). Il est autorisé de partager et adapter l'oeuvre tant que l'auteur est crédité et la license est indiquée (avec le lien ci-dessus). Vous devez aussi indiquer si des changements on été fait vis-à-vis de l'original.

  • Informations
    sur cette fiche
  • Reference-ID
    10433919
  • Publié(e) le:
    11.09.2020
  • Modifié(e) le:
    02.06.2021
 
Structurae coopère avec
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine