0
  • DE
  • EN
  • FR
  • Base de données et galerie internationale d'ouvrages d'art et du génie civil

Publicité

Fragility Analysis of Existing Unreinforced Masonry Buildings through a Numerical-based Methodology

Auteur(s):
Médium: article de revue
Langue(s): anglais
Publié dans: The Open Civil Engineering Journal, , n. 1, v. 6
Page(s): 121-130
DOI: 10.2174/1874149501206010121
Abstrait:

As an approach to the problem of seismic vulnerability evaluation of existing buildings using the predicted vul-nerability method, numerical models can be applied to define fragility curves of typical buildings which represent building classes. These curves can be then combined with the seismic hazard to calculate the seismic risk for a building class (or individual buildings). For some buildings types, mainly the unreinforced masonry structures, such fragility analysis is complicated and time consuming if a Finite Element-based method is used. The FEM model has to represent the structural geometry and relationships between different structural elements through element connectivity. Moreover, the FEM can face major challenges to represent large displacements and separations for progressive collapse simulations. Therefore, the Applied Element Method which combines the advantages of FEM with that of the Discrete Element Method in terms of accurately modelling a deformable continuum of discrete materials is used in this paper to perform the fragility analysis for unreinforced masonry buildings. To this end, a series of nonlinear dynamic analyses using the AEM has been per-formed for two unreinforced masonry buildings (a 6-storey stone masonry and a 4-storey brick masonry) using more than 50 ground motion records. Both in-plane and out-of-plane failure have been considered in the damage analysis. The dis-tribution of the structural responses and inter-storey drifts are used to develop spectral-based fragility curves for the five European Macroseismic Scale damage grades.

Copyright: © 2012 Amin Karbassi
License:

Cette oeuvre a été publiée sous la license Creative Commons Attribution 4.0 (CC-BY 4.0). Il est autorisé de partager et adapter l'oeuvre tant que l'auteur est crédité et la license est indiquée (avec le lien ci-dessus). Vous devez aussi indiquer si des changements on été fait vis-à-vis de l'original.

  • Informations
    sur cette fiche
  • Reference-ID
    10175828
  • Publié(e) le:
    02.01.2019
  • Modifié(e) le:
    02.06.2021
 
Structurae coopère avec
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine