0
  • DE
  • EN
  • FR
  • Base de données et galerie internationale d'ouvrages d'art et du génie civil

Publicité

Fluid Flow Modeling and Experimental Investigation on a Shear Thickening Fluid Damper

Auteur(s):





Médium: article de revue
Langue(s): anglais
Publié dans: Buildings, , n. 11, v. 14
Page(s): 3548
DOI: 10.3390/buildings14113548
Abstrait:

Shear Thickening Fluid (STF) is a specialized high-concentration particle suspension capable of rapidly and reversibly altering its viscosity when exposed to sudden impacts. Consequently, STF-based dampers deliver a self-adaptive damping force and demonstrate significant potential for applications in structural vibration control. This study presents both a modeling and experimental investigation of a novel double-rod structured STF damper. Initially, a compound STF is formulated using silica particles as the dispersed phase and polyethylene glycol solution as the dispersing medium. The rheological properties of the STF are then experimentally evaluated. The STF’s constitutive rheological behavior is described using the G-R model. Following this, the flow behavior of the STF within the damper’s annular gap is explored, leading to the development of a two-dimensional axisymmetric fluid simulation model for the damper. Based on this model, the dynamic mechanism of the proposed STF damper is analyzed. Subsequently, the STF damper is optimally designed and subjected to experimental investigation using a dynamic testing platform under different working conditions. The experimental results reveal that the proposed STF damper, whose equivalent stiffness can achieve a nearly threefold change with excitation frequency and amplitude, exhibits good self-adaptive capabilities. By dividing the damper force into two parts: the frictional damping pressure drop, and the osmotic pressure drop generated by the “Jamming effect”. A fitting model is proposed, and it aligns closely with the nonlinear performance of the STF damper.

Copyright: © 2024 by the authors; licensee MDPI, Basel, Switzerland.
License:

Cette oeuvre a été publiée sous la license Creative Commons Attribution 4.0 (CC-BY 4.0). Il est autorisé de partager et adapter l'oeuvre tant que l'auteur est crédité et la license est indiquée (avec le lien ci-dessus). Vous devez aussi indiquer si des changements on été fait vis-à-vis de l'original.

  • Informations
    sur cette fiche
  • Reference-ID
    10804673
  • Publié(e) le:
    10.11.2024
  • Modifié(e) le:
    25.01.2025
 
Structurae coopère avec
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine