0
  • DE
  • EN
  • FR
  • Base de données et galerie internationale d'ouvrages d'art et du génie civil

Publicité

Flexural Capacity of Steel-Concrete Composite Beams under Hogging Moment

Auteur(s):





Médium: article de revue
Langue(s): anglais
Publié dans: Advances in Civil Engineering, , v. 2019
Page(s): 1-13
DOI: 10.1155/2019/3453274
Abstrait:

This study investigates the flexural strength of simply supported steel-concrete composite beams under hogging moment. A total of 24 composite beams are included in the experiments, and ABAQUS software is used to establish finite element (FE) models that can simulate the mechanical properties of composite beams. In a parametric study, the influences of several major parameters, such as shear connection degree, stud arrangement and diameter, longitudinal and transverse reinforcement ratios, loading manner, and beam length, on flexural strength were investigated. Thereafter, three standards, namely, GB 50017, Eurocode 4, and BS 5950, were used to estimate the flexural strength of the composite beams. These codes were also compared with experimental and numerical results. Results indicate that GB 50017 may provide better estimations than the other two codes.

Copyright: © 2019 Jing Liu et al.
License:

Cette oeuvre a été publiée sous la license Creative Commons Attribution 4.0 (CC-BY 4.0). Il est autorisé de partager et adapter l'oeuvre tant que l'auteur est crédité et la license est indiquée (avec le lien ci-dessus). Vous devez aussi indiquer si des changements on été fait vis-à-vis de l'original.

  • Informations
    sur cette fiche
  • Reference-ID
    10310150
  • Publié(e) le:
    05.03.2019
  • Modifié(e) le:
    02.06.2021
 
Structurae coopère avec
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine