0
  • DE
  • EN
  • FR
  • Base de données et galerie internationale d'ouvrages d'art et du génie civil

Publicité

Flexural behaviour of reinforced self compacting concrete beams subjected to elevated temperature before and after retrofitting

Auteur(s):

Médium: article de revue
Langue(s): anglais
Publié dans: Journal of Structural Fire Engineering, , n. 3, v. 12
Page(s): 293-308
DOI: 10.1108/jsfe-07-2020-0022
Abstrait:

Purpose

The purpose of the paper is to study the effect of elevated temperature on load carrying capacity of reinforced self compacting concrete beams and the performance of deteriorated beams after retrofitting by GFRP sheets. The reinforced beams which were exposed to sustained elevated temperature and tested for flexural load-carrying capacity. Further deteriorated beams (exposed from 500°C to 800°C) were re-strengthened by adopting retrofitting with GFRP sheets.

Design/methodology/approach

The investigation includes the concrete specimens, i.e. cubes of 150 mm, cylinders of size 150 mm dia with 300 mm height and beams of 150 × 150 × 1,100 mm, reinforced with minimum tension reinforcement according to IS 456–2000. The specimens were subjected to elevated temperature from 300°C to 800°C with an interval of 100°C for 2 h. The residual compressive strength, modulus of elasticity, load at first crack of beams and load-carrying capacity of beams for 5-mm deflection were measured before and after retrofitting.

Findings

The result shows that there is a gain in residual compressive strength at 300°C and beyond which it decreases. The modulus of elasticity, load at first crack and load-carrying capacity of beams reduces continuously with an increase in temperature. The decrease in load-carrying capacity of beams is observed from 27.55% and up to 38.77% between the temperature range of 500°C–800°C and after the retrofitting of distressed beams, the load carrying capacity increases up to 24.48%.

Originality/value

Better performance was observed with retrofitting by GFRP sheets when the specimens were distressed due to elevated temperatures.

Structurae ne peut pas vous offrir cette publication en texte intégral pour l'instant. Le texte intégral est accessible chez l'éditeur. DOI: 10.1108/jsfe-07-2020-0022.
  • Informations
    sur cette fiche
  • Reference-ID
    10624473
  • Publié(e) le:
    26.08.2021
  • Modifié(e) le:
    26.08.2021
 
Structurae coopère avec
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine