Finite Element Analysis on the Seismic Performance of Concrete-Filled Steel Tube Columns with a Multiple-Chamber Round-Ended Cross-Section

This study proposes a form of concrete-filled steel tube column with a multiple-chamber round-ended cross-section (M-CFST). Longitudinal and transverse stiffening ribs divide the circular-ended section into different chambers, strengthening the steel tube’s confinement effect on the core concrete and improving the component’s seismic performance. A three-dimensional finite element (FE) solid model of the M-CFST is created by employing the FE software ABAQUS. Quasi-static analysis is conducted to investigate the influence of parameters, such as chamber arrangement, aspect ratio, and axial compression ratio, on flexural hysteresis performance. Moreover, the failure modes, hysteresis curves, skeleton curves, strain development, and energy dissipation of the components are analyzed. The results show the following: (1) The FE model presented in this study can simulate the quasi-static behavior of CFST columns accurately, and the calculated results are in good agreement with the measured values. (2) The seismic performance of the composite column is excellent, with a large number of chambers leading to a robust hysteresis curve for the composite columns, resulting in increased bearing capacity and energy dissipation capacity. However, the energy dissipation performance of the specimen with a two-chamber arrangement is slightly lower than that with a single-chamber arrangement. (3) The results of the finite element analysis suggest that the long and short sides of the CFST columns with a large length–width ratio should be arranged to be relatively close in length.

Cette oeuvre a été publiée sous la license Creative Commons Attribution 4.0 (CC-BY 4.0). Il est autorisé de partager et adapter l'oeuvre tant que l'auteur est crédité et la license est indiquée (avec le lien ci-dessus). Vous devez aussi indiquer si des changements on été fait vis-à-vis de l'original.