0
  • DE
  • EN
  • FR
  • Base de données et galerie internationale d'ouvrages d'art et du génie civil

Publicité

Finite Element Analysis and Optimization of the Rotational Stiffness of Semi-Rigid Base Connection under Simultaneous Moment and Tension

Auteur(s):
ORCID


Médium: article de revue
Langue(s): anglais
Publié dans: Buildings, , n. 7, v. 14
Page(s): 2166
DOI: 10.3390/buildings14072166
Abstrait:

The base connection is flexible, not fully pinned/fixed, implying a nonlinear moment–rotation relationship. This deviates from a linear response, where rotation is not directly proportional to the applied moment. Numerical investigations using the commercial software ABAQUS were conducted to analyze the steel base plate connections. The finite element (FE) models were verified against previous experimental results. Moreover, numerical findings of a comprehensive parametric investigation were conducted. The studied connections were examined with different configurations, including variations in the diameter, spacing, and number of the anchor bolts; the thickness of the base plate; and the applied axial force. The current study aims to use numerical results combined with the whale optimization algorithm (WOA) and classical genetic algorithm (GA) to derive a formulation for the moment–rotation (M-θr) relationship. The distinctive aspect of this formulation is that it aims to simulate the nonlinear rotational behavior exhibited by flexible base connections under combined moment and tension loads, while also considering various parameters such as bolt number/diameter and plate thickness. The findings indicate that the WOA is capable of obtaining an optimal equation for accurately simulating the M-Ɵr relationship. This underscores the ability of the WOA to effectively address the complexity of the problem and provide a reliable equation for predicting the rotational behavior of such connections. Consequently, the WOA method can be utilized to calculate the rotational stiffness at H/150, offering valuable support for engineering design processes.

Copyright: © 2024 by the authors; licensee MDPI, Basel, Switzerland.
License:

Cette oeuvre a été publiée sous la license Creative Commons Attribution 4.0 (CC-BY 4.0). Il est autorisé de partager et adapter l'oeuvre tant que l'auteur est crédité et la license est indiquée (avec le lien ci-dessus). Vous devez aussi indiquer si des changements on été fait vis-à-vis de l'original.

  • Informations
    sur cette fiche
  • Reference-ID
    10795565
  • Publié(e) le:
    01.09.2024
  • Modifié(e) le:
    01.09.2024
 
Structurae coopère avec
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine