0
  • DE
  • EN
  • FR
  • Base de données et galerie internationale d'ouvrages d'art et du génie civil

Publicité

Fibre-reinforced concrete in fib Model Code 2010: principles, models and test validation

Auteur(s):


Médium: article de revue
Langue(s): anglais
Publié dans: Structural Concrete, , n. 4, v. 14
Page(s): 342-361
DOI: 10.1002/suco.201300021
Abstrait:

In the fib Model Code for Concrete Structures 2010, fibre-reinforced concrete (FRC) is recognized as a new material for structures. This introduction will favour forthcoming structural applications because the need of adopting new design concepts and the lack of international building codes have significantly limited its use up to now. In the code, considerable effort has been devoted to introducing a material classification to standardize performance-based production and stimulate an open market for every kind of fibre, favouring the rise of a new technological player: the composite producer.
Starting from standard classification, the simple constitutive models introduced allow the designer to identify effective constitutive laws for design, trying to take into account the major contribution in terms of performance and providing good orientation for structural uses. Basic new concepts such as structural characteristic length and new factors related to fibre distribution and structural redistribution benefits are taken into account. A few examples of structural design starting from the constitutive laws identified are briefly shown.
FRC can be regarded as a special concrete characterized by a certain toughness after cracking. For this reason, the most important constitutive law introduced is the stress-crack opening response in uniaxial tension. A wide discussion of the constitutive models introduced to describe this behaviour, which controls all the main contributions of fibres for a prevailing mode I crack propagation, is proposed. The validity of the models is discussed with reference to ordinary cross-sections as well as thin-walled elements by adopting plane section or finite element models.

Disponible chez: Voir chez l'éditeur
Structurae ne peut pas vous offrir cette publication en texte intégral pour l'instant. Le texte intégral est accessible chez l'éditeur. DOI: 10.1002/suco.201300021.
  • Informations
    sur cette fiche
  • Reference-ID
    10069530
  • Publié(e) le:
    15.12.2013
  • Modifié(e) le:
    03.11.2018
 
Structurae coopère avec
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine