0
  • DE
  • EN
  • FR
  • Base de données et galerie internationale d'ouvrages d'art et du génie civil

Publicité

Failure Mechanism of a Coal-Rock Combined Body with Inclinations of Structural Planes and a Calculation Model for Impact Energy

Auteur(s):



Médium: article de revue
Langue(s): anglais
Publié dans: Advances in Civil Engineering, , v. 2019
Page(s): 1-18
DOI: 10.1155/2019/3735427
Abstrait:

A coal-rock (CR) combined body can be used to simulate structures of coal and rock strata, and its impact-induced failure characteristic conforms more close to engineering practice. Exploring the mechanical properties and impact energy in a CR combined body contributes to better predictions of rock bursts in coal mines. In the study, the mechanical properties of CR combined bodies with four different inclinations (0°, 15°, 30°, and 45°) of structural planes were measured, and also their failure mechanism was analysed. Based on the theory of particle mechanics, a calculation model for impact energy in a CR combined body with inclinations was established and then verified by using monitored acoustic emission (AE) data. The test results showed that inclination affected mechanical properties and failure characteristics of the CR combined body, i.e., the larger the inclination, the lower the strength and impact energy in the CR combined body and the lower the level of damage. The proposed calculation model for impact energy revealed the mechanical essence of energy accumulation and release of a CR combined body, providing a reference for investigating rock burst in coal mines.

Copyright: © 2019 Yi-Chao Zhao et al.
License:

Cette oeuvre a été publiée sous la license Creative Commons Attribution 4.0 (CC-BY 4.0). Il est autorisé de partager et adapter l'oeuvre tant que l'auteur est crédité et la license est indiquée (avec le lien ci-dessus). Vous devez aussi indiquer si des changements on été fait vis-à-vis de l'original.

  • Informations
    sur cette fiche
  • Reference-ID
    10403245
  • Publié(e) le:
    28.12.2019
  • Modifié(e) le:
    02.06.2021
 
Structurae coopère avec
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine