Exploring chloride-induced corrosion in reinforced concrete structures through embedded piezo sensor technology: an experimental and numerical study
Auteur(s): |
Tarun Morwal
Tushar Bansal Ammar Azam Visalakshi Talakokula T. Jothi Saravanan |
---|---|
Médium: | article de revue |
Langue(s): | anglais |
Publié dans: | Smart Materials and Structures, 2 février 2024, n. 3, v. 33 |
Page(s): | 035039 |
DOI: | 10.1088/1361-665x/ad287a |
Abstrait: |
Corrosion of steel in concrete is one of the major problems with respect to the durability of reinforced concrete (RC) structures. Thus, monitoring the corrosion in real-time is essential to prevent structural damage. However, one of the main challenges is to simulate the real-time development of corrosion in the RC structure. In recent years, smart aggregates, also called embedded piezo sensors (EPS), have become increasingly popular for monitoring localized and corrosion damage in RC structures using electro-mechanical impedance (EMI). This paper presents the experimental and numerical investigation of corrosion in RC structures subjected to the chloride-laden environment using EPS via the EMI technique. To fulfil this objective, the study has been carried out in two stages such as; in the first stage, the experiments are conducted on the RC specimen, and the EMI response was obtained both in a pristine state and when accelerated corrosion progressed. In the second step, a numerical model of the RC specimen has been developed based on the experimental data in the COMSOL software, and the effect of corrosion in the form of varying mass loss percentages has been simulated. Based on the results, it is concluded that the experimental and numerical conductance signatures before and after corrosion are matched. The deterioration in terms of stiffness loss in the RC specimen was 18.20% at 30% mass loss. |
- Informations
sur cette fiche - Reference-ID
10769275 - Publié(e) le:
29.04.2024 - Modifié(e) le:
29.04.2024