• DE
  • EN
  • FR
  • Base de données et galerie internationale d'ouvrages d'art et du génie civil



Médium: article de revue
Langue(s): anglais
Publié dans: The Open Construction and Building Technology Journal, , n. 1, v. 8
Page(s): 279-288
DOI: 10.2174/1874836801408010279

Passive protection systems based on the use of metal shear panels represent an effective way for achieving a significant improvement of the seismic response of buildings. Nevertheless, the dissipative capacity of these devices could be limited by buckling phenomena. In order to reduce the influence of instability, "Buckling Inhibited Shear Panels" have been recently introduced as an innovative and convenient solution. It is based on the use of steel plated elements able to restrain out-of-plane displacements of the basic shear plate but without any type of interactions in terms of membrane strains. In this paper the outcomes of an extensive experimental campaign on the proposed system are shown. The tested coupons are made of steel and are characterized by two different thicknesses. Moreover, two technologies for the inhibition of buckling phenomena are examined. The former is able to contain the out-of-plane displacements for the only plate portions that are most involved in the development of the first critical modes. The latter, with a more complex assemblage of the parts, is obtained by inhibiting the out-of-plane deformations of the whole system. The results obtained, compared to the ones given by only steel plates without buckling restraining devices, allow to highlight the increase in terms of energy dissipation capacity that is possible to achieve through the proposed technologies, also evidencing some critical issues that can arise when little accuracy in the assembly of the system is spent.

Copyright: © 2014 Gianfranco De Matteis, Federica D’Agostino, Giuseppe Brando

Cette oeuvre a été publiée sous la license Creative Commons Attribution 4.0 (CC-BY 4.0). Il est autorisé de partager et adapter l'oeuvre tant que l'auteur est crédité et la license est indiquée (avec le lien ci-dessus). Vous devez aussi indiquer si des changements on été fait vis-à-vis de l'original.

  • Informations
    sur cette fiche
  • Reference-ID
  • Publié(e) le:
  • Modifié(e) le: