Experimental Study on the Shear Behavior of HTRCS-Reinforced Concrete Beams
Auteur(s): |
Qu Yu
Yongqing Yang Qisong Lin Dan Yang |
---|---|
Médium: | article de revue |
Langue(s): | anglais |
Publié dans: | Buildings, 8 octobre 2024, n. 10, v. 14 |
Page(s): | 3209 |
DOI: | 10.3390/buildings14103209 |
Abstrait: |
High-toughness resin concrete steel mesh (HTRCS) composites, as a novel reinforcement material, are extensively employed, yet there has been a lack of comprehensive quantitative studies on them, and our knowledge about them predominantly relies on experimental investigations. To delve into the shear performance of reinforced concrete beams fortified with HTRCS, this research executed four-point bending static load experiments on a benchmark of two standard beams and six HTRCS-reinforced beams. The results demonstrate that the shear bearing capacity of the reinforced concrete beams was notably enhanced with HTRCS, ranging from approximately 10% to 65%. Further examination revealed that the stiffness of the specimens is significantly influenced by the HTRCS thickness, shear–span ratio, and concrete strength, with the shear–span ratio exerting the most notable impact on stiffness. This analysis furnishes a solid theoretical foundation for the utilization of HTRCS. |
Copyright: | © 2024 by the authors; licensee MDPI, Basel, Switzerland. |
License: | Cette oeuvre a été publiée sous la license Creative Commons Attribution 4.0 (CC-BY 4.0). Il est autorisé de partager et adapter l'oeuvre tant que l'auteur est crédité et la license est indiquée (avec le lien ci-dessus). Vous devez aussi indiquer si des changements on été fait vis-à-vis de l'original. |
5.56 MB
- Informations
sur cette fiche - Reference-ID
10804680 - Publié(e) le:
10.11.2024 - Modifié(e) le:
10.11.2024