0
  • DE
  • EN
  • FR
  • Base de données et galerie internationale d'ouvrages d'art et du génie civil

Publicité

Experimental Study on the Effect of Large Temperature Difference on Compressive Strength and Pore Structure of Semirigid Base

Auteur(s):
ORCID
ORCID


Médium: article de revue
Langue(s): anglais
Publié dans: Advances in Civil Engineering, , v. 2022
Page(s): 1-17
DOI: 10.1155/2022/4603007
Abstrait:

Understanding the evolution of mechanical properties and pore structure of semirigid base under large temperature difference is of great significance for evaluating the durability and safety of semirigid base structure and studying the damage cracking mechanism and prevention technology of semirigid base induced by large temperature difference climate. This paper studies the variation law of peak stress and dynamic modulus, the evolution characteristics of pore structure, and the pore size distribution of semirigid base after different cycles at different temperature intervals. Based on the analysis of peak stress and dynamic modulus test results, the degradation effect of freeze-thaw environment (−20°C∼20°C) on semirigid base is far greater than that of high-temperature environment (20°C∼60°C) and low-temperature environment (−5°C∼−30°C). There are significant decreases in peak stress and dynamic modulus of semirigid base in the late cycle (12 to 15 cycles). Under low-temperature and freeze-thaw environments, the axial load resistance of semirigid base is significantly correlated with the deformation resistance, and the correlation between the two is not significant under high-temperature environment. The variability of the thermal expansion and contraction characteristics of the internal microscopic phases of the semirigid base and the force characteristics of the pore interface phases are the root causes of the damage and cracking of the pavement base in a large temperature difference climate.

Copyright: © Ming Dai et al. et al.
License:

Cette oeuvre a été publiée sous la license Creative Commons Attribution 4.0 (CC-BY 4.0). Il est autorisé de partager et adapter l'oeuvre tant que l'auteur est crédité et la license est indiquée (avec le lien ci-dessus). Vous devez aussi indiquer si des changements on été fait vis-à-vis de l'original.

  • Informations
    sur cette fiche
  • Reference-ID
    10679031
  • Publié(e) le:
    18.06.2022
  • Modifié(e) le:
    10.11.2022
 
Structurae coopère avec
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine