0
  • DE
  • EN
  • FR
  • Base de données et galerie internationale d'ouvrages d'art et du génie civil

Publicité

Experimental Study on Solidified Lake Sediment Based on Industrial Solid Waste and Construction Waste: Stabilization and Mechanism

Auteur(s):




Médium: article de revue
Langue(s): anglais
Publié dans: Buildings, , n. 8, v. 13
Page(s): 2053
DOI: 10.3390/buildings13082053
Abstrait:

Occupation of land and damage to the surrounding ecosystem may occur due to the accumulation of dredged lake sediments. In order to solve the large amount of dredged lake sediments, industrial wastes (slag, desulfurization gypsum) and urban construction waste were used to solidify the lake substrate, obtained a new construction material. Water content, volumetric shrinkage, unconfined compressive strength and flexural strength parameters and hydraulic conductivity coefficients of the solidified sediment were obtained from water content determination tests, volumetric shrinkage tests, unconfined compressive strength tests, flexural tests and permeation tests. Mineralogical composition and microstructural characterization of the solidified sediment using X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM) were obtained. The solidification mechanism of lake sediment under the coupling of industrial waste and urban construction waste was revealed. The water content of the specimens decreased rapidly, and shrinkage deformation occurred in curing for 7 d. The volumetric shrinkage of 28 d was eventually maintained at 1.27–5.19%. The trend of specimen strength changed with the extension of time in the overall increase state, the compressive strength and flexural strength within 28 d were 3.15–10.96 MPa and 0.64–2.69 MPa, respectively. The solidified sediment material showed excellent anti-seepage performance, the hydraulic conductivity reached stability at 1.22 × 10−8–55.4 × 10−8 cm/s. Gismondine, gypsum, calcite, scawtite and fibrous C-S-H phases were generated in the solidified material.

Copyright: © 2023 by the authors; licensee MDPI, Basel, Switzerland.
License:

Cette oeuvre a été publiée sous la license Creative Commons Attribution 4.0 (CC-BY 4.0). Il est autorisé de partager et adapter l'oeuvre tant que l'auteur est crédité et la license est indiquée (avec le lien ci-dessus). Vous devez aussi indiquer si des changements on été fait vis-à-vis de l'original.

  • Informations
    sur cette fiche
  • Reference-ID
    10737331
  • Publié(e) le:
    02.09.2023
  • Modifié(e) le:
    14.09.2023
 
Structurae coopère avec
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine