Experimental Study on Physicomechanical Properties of Sandstone under Acidic Environment
Auteur(s): |
ShuGuang Li
Runke Huo Bo Wang Zhenzhong Ren Yu Ding Meiting Qian Tian Qiu |
---|---|
Médium: | article de revue |
Langue(s): | anglais |
Publié dans: | Advances in Civil Engineering, 2018, v. 2018 |
Page(s): | 1-15 |
DOI: | 10.1155/2018/5784831 |
Abstrait: |
The influence of acid solution and immersion time on the physicomechanical properties of sandstone is investigated. Uniaxial compression tests on sandstone samples are conducted to determine the variations of relative mass, deformation, and strength characteristics of sandstone subjected to different pH sulfuric acid corrosion values. The changes of pH and Mg2+and Ca2+concentration of immersion solutions are monitored during soaking. The corrosion mechanism of sandstone attacked by the acid solution is discussed with the results of SEM tests. Based on the nondestructive CT scanning test, the damage variables of acid-corroded sandstone are deduced, and the damage degree of sandstone is quantitatively analyzed. The results indicate that the deformation characteristics of sandstone samples under acid attack are characterized by the softening of rock, and the softening degree gradually increases with the increase of the acidity and the soaking time. The peak strength of sandstone samples declines as soaking time extends. The chemical effects lead to a large amount of dissolution of the rock mineral assemblage, resulting in the large-scale development of the pores inside the rock, which changes the macroscopic mechanical properties. The damage variables of acid corrosion sandstone based on CT numbers are deduced, and the quantitative relationship between damage variables and immersion time is established, which provides a basis for constructing a damage constitutive model of sandstone in the acidic environment. |
Copyright: | © 2018 Shuguang Li et al. |
License: | Cette oeuvre a été publiée sous la license Creative Commons Attribution 4.0 (CC-BY 4.0). Il est autorisé de partager et adapter l'oeuvre tant que l'auteur est crédité et la license est indiquée (avec le lien ci-dessus). Vous devez aussi indiquer si des changements on été fait vis-à-vis de l'original. |
5.63 MB
- Informations
sur cette fiche - Reference-ID
10176663 - Publié(e) le:
30.11.2018 - Modifié(e) le:
02.06.2021