Experimental Study on Pavement Performance of Warm High Modulus Mixture WHMM-13

In order to solve the dusting and rutting problems of hot mix asphalt mixture during construction and operation, rutting test, bending test, Marshall stability test, freeze-thaw splitting test, uniaxial compression dynamic modulus test, overlay test, and four-point bending fatigue life test are applied on WHMM-13 to study the high-temperature stability, low-temperature cracking resistance, water stability, anti-reflection crack performance and fatigue durability in comparison with HMM-13. The results show that, compared to HMM-13, the dynamic stability and dynamic modulus (45 ℃, 10 Hz) of WHMM- 13 are improved by 10.0% and 47% respectively, and the rutting depth is reduced by 27.3%, indicating that the high temperature stability of WHMM-13 has been greatly improved. As for low temperature cracking resistance, the bending failure strain, stiffness modulus, flexural tensile strength and rupture energy of WHMM-13 are slightly lower than those of HMM-13. As for water stability, the residual stability of WHMM-13 in immersion Marshall test is 87.5%, and the splitting strength is 82.3%, both higher than that of HMM-13. As for anti-reflection crack performance, the total tensile rupture energy of WHMM-13 is 2.32 times that of HMM-13, with cracking resistance index (CRI) increased by 25%, which shows that WHMM-13 has better strength, can effectively prevent the crack from spreading and effectively improve the cracking resistance capacity of asphalt pavement. As for fatigue durability, the fatigue life of WHMM-13 is 5.4% lower than that of HMM-13, with bending stiffness modulus and cumulative dissipation energy reduced by 11.3% and 2.8% respectively, indicating that the fatigue durability of WHMM-13 is slightly reduced.