Experimental Study of Water Transfer and Ice Accumulation in Freezing Soils under Different Conditions
Auteur(s): |
Sihao Liang
Xinyan Ma Qiang Li Xinyu Ye Jianlong Liu Jian Zhang |
---|---|
Médium: | article de revue |
Langue(s): | anglais |
Publié dans: | Advances in Civil Engineering, janvier 2021, v. 2021 |
Page(s): | 1-11 |
DOI: | 10.1155/2021/3869820 |
Abstrait: |
A series of tests for water transfer and ice accumulation were conducted under different soil types and conditions of water supply method, temperature gradient, and initial water content; the influence of the above parameters on the efficiency of water and vapor transfer was investigated and discussed. The main conclusions drawn are as follows. First, due to the difference in permeability for different soil type, water (i.e., liquid water and vapor) transfers differently. The water (or ice) accumulated in the soils of calcareous sand, silty soil in Lanzhou (SSL), red clay in Changsha, and silty soil in Hohhot (SSH) under the top plate is 34.5%, 21.0%, 11.33%, and 26.7%, respectively. In addition, the water (or ice) accumulation is determined by the holding capacity of water. Second, the supply method of liquid water is more efficiently compared with that of vapor supply, with the water contents increasing to 60.5% and 57.3% for liquid water and vapor supply. Third, the larger the temperature gradient, the greater the water accumulation in the frozen area. The increased amount of water mass under different temperature boundary conditions is 227.9 g, 253.3 g, and 273.8 g, respectively. Finally, the initial water content in silty soil has a significant influence on water and vapor transfer. The increased amounts of water for the tests of the initial water content of 5%, 10%, and 15% are 282.6 g, 253.3 g, and 132.5 g, respectively. The smaller the initial water content, the greater the water transfer in the unfrozen zone and vapor transfer in the frozen zone. |
Copyright: | © Sihao Liang et al. |
License: | Cette oeuvre a été publiée sous la license Creative Commons Attribution 4.0 (CC-BY 4.0). Il est autorisé de partager et adapter l'oeuvre tant que l'auteur est crédité et la license est indiquée (avec le lien ci-dessus). Vous devez aussi indiquer si des changements on été fait vis-à-vis de l'original. |
1.26 MB
- Informations
sur cette fiche - Reference-ID
10607751 - Publié(e) le:
15.05.2021 - Modifié(e) le:
02.06.2021