Experimental Study and Numerical Simulation of the Tensile Properties of Corroded Bolt-Sphere Joints
Auteur(s): |
Qi Si
Yong Tang Liang Zong Heng Liu Buqing Kang |
---|---|
Médium: | article de revue |
Langue(s): | anglais |
Publié dans: | Buildings, 27 octobre 2022, n. 11, v. 12 |
Page(s): | 1989 |
DOI: | 10.3390/buildings12111989 |
Abstrait: |
In order to study the mechanical behavior of corroded bolt-sphere joints and predict the bearing capacity of the joints in a corrosive environment, bolt-sphere-connection and bolt-sphere-joint specimens with differing degrees of corrosion were obtained by accelerated corrosion. The tensile properties of the corroded bolt-sphere connections and the bolt-sphere joints with members were tested, respectively, and the effects of different degrees of corrosion on the tensile properties of bolted spherical joints were studied. Finally, a numerical simulation of the corroded bolt-sphere connections and bolt-sphere joints with members was carried out, and the main factors affecting the tensile performance of the corroded bolt-sphere joints was clarified; the degradation law of the tensile properties of the bolted sphere joints with service time was established. |
Copyright: | © 2022 by the authors; licensee MDPI, Basel, Switzerland. |
License: | Cette oeuvre a été publiée sous la license Creative Commons Attribution 4.0 (CC-BY 4.0). Il est autorisé de partager et adapter l'oeuvre tant que l'auteur est crédité et la license est indiquée (avec le lien ci-dessus). Vous devez aussi indiquer si des changements on été fait vis-à-vis de l'original. |
6.18 MB
- Informations
sur cette fiche - Reference-ID
10700249 - Publié(e) le:
10.12.2022 - Modifié(e) le:
15.02.2023