• DE
  • EN
  • FR
  • Base de données et galerie internationale d'ouvrages d'art et du génie civil

Publicité

Experimental Investigation of the Physical and Mechanical Properties of Cassava Starch Modified Concrete

Auteur(s):


Médium: article de revue
Langue(s): en 
Publié dans: The Open Construction and Building Technology Journal, , n. 1, v. 13
Page(s): 331-343
DOI: 10.2174/1874836801913010331
Abstrait: Background:

Concrete is a widely used material in construction, which has given rise to innovations in terms of modifying some of its properties to meet desired requirements. The use of chemical admixtures is important in this regard, which has necessitated the search for new materials which can serve as a substitute.

Objective:

This research work investigates the use of Cassava Starch (CS) as an admixture for improving the physical and mechanical properties of concrete.

Methodology:

The physical and mechanical properties of concrete were studied by adding CS by weight of cement at 0.4, 0.8, 1.2, 1.6 and 2.0%, respectively. Concrete cubes and cylinders were cast and cured for a test period of 7, 14, 28, 56 and 90 days, respectively. Unreinforced beams of size 150 x 150 x 530 were cast and cured for 28 days. A total of 6 mix proportion was used, five out of which were used to examine the effect of CS on the properties of concrete.

Results:

The workability of concrete reduced as the percentage of CS increased due to its viscosity modifying properties. CS increased the initial and final setting time of concrete for every increase in percentage addition. An improvement in the compressive strength, split tensile strength, flexural strength and elastic modulus of concrete were noticed for cassava starch-modified concrete over the control for some of the mixes at all days of curing. The density of concrete was found to decrease at 1.6 and 2.0% addition of CS in concrete.

Conclusion:

From the results of this investigation, CS improved the compressive, split tensile, flexural and elastic modulus of concrete at an optimum of 0.8 percentage addition of CS. The setting time of concrete was also increased, which makes CS suitable to be used as a retarding admixture in hot weather concreting. Based on the findings of the work, CS can be considered as an admixture to be used as a substitute for retarders and viscosity modifying admixtures for improved concrete properties.

Copyright: © 2019 Daniel Oluwabusayo ONI, John Mwero, Charles Kabubo
License:

Cette oeuvre a été publiée sous la license Creative Commons Attribution 4.0 (CC-BY 4.0). Il est autorisé de partager et adapter l'oeuvre tant que l'auteur est crédité et la license est indiquée (avec le lien ci-dessus). Vous devez aussi indiquer si des changements on été fait vis-à-vis de l'original.

Publicité

  • Informations
    sur cette fiche
  • Reference-ID
    10407936
  • Publié(e) le:
    04.01.2020
  • Modifié(e) le:
    04.01.2020