Experimental Assessment of Mechanical Properties of Corroded Low–Alloy Structural Steel

This study investigates the mechanical properties of corroded Q355B structural steel subjected to a simulated marine atmosphere and an industrial atmosphere. The micro-morphology of corroded steel in two different environments was analyzed by SEM (scanning electron microscopy). Tension tests were performed to determine the degradation laws of the mechanical properties of corroded steel, including its yield strength, ultimate strength, elastic modulus, ultimate strain and elongation after fracture. The test results indicate that the elongation after fracture of the steel is the most severely deteriorated property after corrosion. The recommended empirical formula for limiting the maximum corrosion rate is established. It is found that when the initial elongation is 30%, the maximum allowable corrosion rate is 19.2%. Based on the achieved results, a simplified time-dependent stress–strain model of Q355B structural steel is established considering the coupling effects of corrosive environments and applied stress, which is also evaluated using relevant research. In addition, axial compression tests were conducted on corroded square stud columns to verify the effectiveness of the established model. It is indicated that the model can be used for fitness-for-purpose analyses in structural integrity assessments.

Cette oeuvre a été publiée sous la license Creative Commons Attribution 4.0 (CC-BY 4.0). Il est autorisé de partager et adapter l'oeuvre tant que l'auteur est crédité et la license est indiquée (avec le lien ci-dessus). Vous devez aussi indiquer si des changements on été fait vis-à-vis de l'original.