0
  • DE
  • EN
  • FR
  • Base de données et galerie internationale d'ouvrages d'art et du génie civil

Publicité

Experimental and Numerical Research on a Sand Cushion Geotechnical Seismic Isolation System in Strong Earthquakes and Cold Regions

Auteur(s): ORCID





ORCID

Médium: article de revue
Langue(s): anglais
Publié dans: Buildings, , n. 9, v. 14
Page(s): 2629
DOI: 10.3390/buildings14092629
Abstrait:

Masonry buildings in high-intensity seismic and cold regions of China face the dual challenges of frost heaving and seismic hazards. To explore the potential of a sand cushion instead of the frozen soil layer to deal with these problems, a cost-effective sand cushion-based Geotechnical Seismic Isolation System (GSI-SC) was developed in this study, where a sand cushion is introduced between the structural foundation and natural soil, while the space around the foundation is backfilled with sand. Shaking table tests on a one-story masonry structure equipped and non-equipped with the GSI-SC system were undertaken to investigate its effectiveness in seismic isolation, where the input wave adopted the north–south component of the EL Centro wave recorded in 1940, and the peak input acceleration (PIA) was set as 0.1 g, 0.2 g, and 0.4 g. It is found that the GSI-SC system significantly reduced the seismic response of the structure, effectively achieving seismic isolation. For a PIA of 0.4 g, the GSI-SC system reduced the acceleration of the roof panel and the inter-story displacement of the structure by 33% and 39%, respectively. Numerical simulations were performed to evaluate the seismic response of buildings equipped and non-equipped with the GSI-SC system. The simulation results matched well with the experimental results, verifying the effectiveness of the newly developed seismic isolation system. The GSI-SC system can provide the potential to reduce frost heave and earthquake disasters for buildings in high-intensity seismic and cold regions.

Copyright: © 2024 by the authors; licensee MDPI, Basel, Switzerland.
License:

Cette oeuvre a été publiée sous la license Creative Commons Attribution 4.0 (CC-BY 4.0). Il est autorisé de partager et adapter l'oeuvre tant que l'auteur est crédité et la license est indiquée (avec le lien ci-dessus). Vous devez aussi indiquer si des changements on été fait vis-à-vis de l'original.

  • Informations
    sur cette fiche
  • Reference-ID
    10795789
  • Publié(e) le:
    01.09.2024
  • Modifié(e) le:
    01.09.2024
 
Structurae coopère avec
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine