Experimental and Numerical Investigation of Geosynthetic-Reinforced Pile-Supported Embankments for Loose Sandy Soils

This research focuses on advancing the geosynthetic-reinforced pile-supported embankment technology over loose sandy soil. A small-scale laboratory model supported by floating piles and a geotextile layer was constructed, and a numerical model was validated against laboratory measurements. This study aims to achieve a more uniform distribution of the load over all piles of the system via a parametric study that analyzes the influence of embankment fill material, horizontal reinforcement scenarios, pile cap shape, and pile type. The results demonstrate that using embankment fill with high cohesion and internal friction properties leads to a significant reduction of 46% and 37% in maximum settlements, respectively, and similarly, results in a noteworthy reduction of 48% and 50% in differential settlements. The incorporation of two geotextile layers contributes to a reduction of up to 30% in maximum settlement. The utilization of plus-shaped caps in small areas, with an area equal to three times the cross-sectional area of the pile, has been substantiated as the preeminent approach for the reduction of settlements. Piles with caps also present better behavior regarding differential settlements compared to longer piles and piles with bigger diameters under the same volume condition.

Cette oeuvre a été publiée sous la license Creative Commons Attribution 4.0 (CC-BY 4.0). Il est autorisé de partager et adapter l'oeuvre tant que l'auteur est crédité et la license est indiquée (avec le lien ci-dessus). Vous devez aussi indiquer si des changements on été fait vis-à-vis de l'original.