0
  • DE
  • EN
  • FR
  • Base de données et galerie internationale d'ouvrages d'art et du génie civil

Publicité

Evolution Analysis of Microseismic Events before and after Mining through Large-Scale Weak Zone with High Confined Water

Auteur(s): ORCID
ORCID
ORCID
ORCID
ORCID
ORCID
ORCID
ORCID
ORCID
ORCID
ORCID
Médium: article de revue
Langue(s): anglais
Publié dans: Advances in Civil Engineering, , v. 2021
Page(s): 1-12
DOI: 10.1155/2021/6915221
Abstrait:

The existence of large-scale weak zone will have a great adverse impact on coal mining in high confined aquifer. Taking the Wutongzhuang Coal Mine which is threatened by high-pressure water as an example, this paper studies the difference between the microseismic events before and after mining and analyzes the influence of the large size weak zone on the coal mining on the confined aquifer. The research results show that the microseismic characteristics of the large soft weak belt are small number of events, the spatial distribution of events is concentrated, and the energy level is large. The amplitude of microseismic events is higher, and the proportion of large events in microseismic events is larger than that of small events; the characteristics of microseismic events caused by mining face mining are that the number of events is more, the distribution of events is loose, the distribution of roof and floor is more, the energy level is less, the amplitude is smaller, and the proportion of small and medium events in microseismic events is larger than that of large events. Due to the joint influence of large-scale weak zone of floor and mining, the floor in the middle area of working face is affected by mining, the number of microseismic events in each aquifer increases suddenly, the karst fissures between the aquifers are further developed, and there is a trend of transfixion. Therefore, measures such as floor grouting should be taken to reinforce the large-scale weak zone before mining.

Copyright: © 2021 Jing Jia et al.
License:

Cette oeuvre a été publiée sous la license Creative Commons Attribution 4.0 (CC-BY 4.0). Il est autorisé de partager et adapter l'oeuvre tant que l'auteur est crédité et la license est indiquée (avec le lien ci-dessus). Vous devez aussi indiquer si des changements on été fait vis-à-vis de l'original.

  • Informations
    sur cette fiche
  • Reference-ID
    10625371
  • Publié(e) le:
    26.08.2021
  • Modifié(e) le:
    17.02.2022
 
Structurae coopère avec
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine