• DE
  • EN
  • FR
  • Base de données et galerie internationale d'ouvrages d'art et du génie civil


Evaluation of the contact angle and wettability of hydrophobised lightweight concrete with sawdust

  1. Suliman N. H. et al., “Concrete using sawdust as partial replacement of sand : Is it strong and does not endanger health ?”, MATEC Web of Conferences, vol. 258, (2019), p. 01015.


  2. Kantautas, A. / Vaickelionis, G. (2000): Modified Sawdust Concrete. Dans: Statyba = Building Construction = Строительство, v. 6, n. 1 (janvier 2000).


  3. Paramasivam P. and Loke Y. O., “Study of sawdust concrete”, International Journal of Cement Composites and Lightweight Concrete, vol. 2, no. 1, (Mar. 1980), pp. 57–61.


  4. Cheng Y. et al., “The Implementation of Waste Sawdust in Concrete”, Engineering, vol. 05, no. 12, (Nov. 2013), pp. 943–947.


  5. Omar M. F. et al., “Partially Replacement of Cement By Sawdust And Fly Ash in Lightweight Foam Concrete”, in IOP Conference Series: Materials Science and Engineering, 2020, vol. 743, no. 1.


  6. Bahtli T. and Ozbay N. S., “Corrosion resistances of C30 concrete: Effect of finely ground bronze sawdust waste”, Materials Chemistry and Physics, vol. 243, (Mar. 2020), p. 122588.


  7. Li M. et al., “Mechanical characterization of concrete containing wood shavings as aggregates”, International Journal of Sustainable Built Environment, vol. 6, no. 2, (Dec. 2017), pp. 587–596.


  8. Sudin R. and Swamy N., “Bamboo and wood fibre cement composites for sustainable infrastructure regeneration”, in Journal of Materials Science, 2006, vol. 41, no. 21, pp. 6917–6924.


  9. Chowdhury S. et al., “The incorporation of wood waste ash as a partial cement replacement material for making structural grade concrete: An overview”, Ain Shams Engineering Journal, vol. 6, no. 2, (Jun. 2015), pp. 429–437.


  10. Siddique R., “Utilization of wood ash in concrete manufacturing”, Resources, Conservation and Recycling, vol. 67, (Oct. 2012), pp. 27–33.


  11. Chowdhury S. et al., “Strength development in concrete with wood ash blended cement and use of soft computing models to predict strength parameters”, Journal of Advanced Research, vol. 6, no. 6, (May 2014), pp. 907–913.


  12. Drdlová M. et al., “The behavior of cement-bonded wood-chip material under static and impact load”, in IOP Conference Series: Materials Science and Engineering, 2018, vol. 379, no. 1, p. 12025.


  13. Coatanlem, Pascale / Jauberthie, Raoul / Rendell, Frank (2006): Lightweight wood chipping concrete durability. Dans: Construction and Building Materials, v. 20, n. 9 (novembre 2006).


  14. Kasai Y. et al., “Study on Wood Chip Concrete with Used Timber”, Special Publication, vol. 179, (Jun. 1998), pp. 905–928.
  15. Chege J. et al., “The effects of pine (Pinus Canariensis) tree bark extract on the properties of fresh and hardened concrete.”, Civil and Environmental Research, vol. 6, no. 9, (2014), pp. 70–81.
  16. Oba K. M. and Amadi I. G., “A Predictive Mathematical Model for Water Absorption of Sawdust Ash - Sand Concrete”, International Journal of Engineering and Management Research, vol. 10, no. 01, (Feb. 2020), pp. 33–41.


  17. Ikponmwosa, Efe Ewaen / Falade, Funso Alphonsus / Fashanu, Theophilus / Ehikhuenmen, Samuel / Adesina, Adeyemi (2019): Experimental and numerical investigation of the effect of sawdust ash on the performance of concrete. Dans: Journal of Building Pathology and Rehabilitation, v. 5, n. 1 (18 novembre 2019).


  18. Oyedepo O. J. et al., “Investigation of properties of concrete using sawdust as partial replacement for sand”, Civil and Environmental Research, vol. 6, no. 2, (2014), pp. 35–42.
  19. Aldred, J. M. / Swaddiwudhipong, S. / Lee, S. L. / Wee, T. H. (2001): The effect of initial moisture content on water transport in concrete containing a hydrophobic admixture. Dans: Magazine of Concrete Research, v. 53, n. 2 (avril 2001).


  20. Demirboǧa R. and Gül R., “The effects of expanded perlite aggregate, silica fume and fly ash on the thermal conductivity of lightweight concrete”, Cement and Concrete Research, vol. 33, no. 5, (May 2003), pp. 723–727.


  21. Kim, H. K. / Jeon, J. H. / Lee, H. K. (2012): Workability, and mechanical, acoustic and thermal properties of lightweight aggregate concrete with a high volume of entrained air. Dans: Construction and Building Materials, v. 29 (avril 2012).


  22. Suchorab Z. et al., “Influence of moisture on heat conductivity coefficient of aerated concrete”, Ecological Chemistry and Engineering S, vol. 18, no. 1, (2011), pp. 111–120.
  23. Suchorab Z. et al., “Capillary rise phenomenon in aerated concrete. Monitoring and simulations”, in Proc. ECOpole 2 (4) (2010), 2010, pp. 285–290.
  24. Lo, Tommy Y. / Cui, H. Z. / Tang, W. C. / Leung, W. M. (2008): The effect of aggregate absorption on pore area at interfacial zone of lightweight concrete. Dans: Construction and Building Materials, v. 22, n. 4 (avril 2008).


  25. Tittarelli F., “Oxygen diffusion through hydrophobic cement-based materials”, Cement and Concrete Research, vol. 39, no. 10, (Oct. 2009), pp. 924–928.


  26. Suchorab Z. et al., “Free of volatile organic compounds protection against moisture in building materials”, Ecological Chemistry and Engineering S, vol. 21, no. 3, (Oct. 2014), pp. 401–411.


  27. Czarnecki L., “Polymer concretes”, Cement Lime Concrete, vol. 15 (2), (2010), pp. 63–85.
  28. Baltazar, Liliana / Santana, João / Lopes, Beatriz / Correia, Joao R. / Rodrigues, M. Paula (2015): Superficial protection of concrete with epoxy resin impregnations: influence of the substrate roughness and moisture. Dans: Materials and Structures, v. 48, n. 6 (juin 2015).


  29. Osterholtz F. D. and Pohl E. R., “Kinetics of the Hydrolysis and Condensation of Organofunctional Alkoxysilanes: A Review”, Journal of Adhesion Science and Technology, vol. 6, no. 1, (1992), pp. 127–149.


  30. Felekoğlu, Burak (2012): A method for improving the early strength of pumice concrete blocks by using alkyl alkoxy silane (AAS). Dans: Construction and Building Materials, v. 28 (mars 2012).


  31. Zhu Y. G. et al., “Influence of silane-based water repellent on the durability properties of recycled aggregate concrete”, Cement and Concrete Composites, vol. 35, no. 1, (Jan. 2013), pp. 32–38.


  32. Nakamura Y. et al., “Surface analysis of silane nanolayer on silica particles using 1H pulse NMR”, Journal of Adhesion Science and Technology, vol. 25, no. 19, (Jan. 2011), pp. 2703–2716.


  33. Xiong G. et al., “Influence of silane coupling agent on quality of interfacial transition zone between concrete substrate and repair materials”, Cement and Concrete Composites, vol. 28, no. 1, (Jan. 2006), pp. 97–101.


  34. Klisińska-Kopacz, Anna / Tišlova, Renata (2012): Effect of hydrophobization treatment on the hydration of repair Roman cement mortars. Dans: Construction and Building Materials, v. 35 (octobre 2012).


  35. MacMullen J. et al., “Brick and mortar treatment by cream emulsion for improved water repellence and thermal insulation”, Energy and Buildings, vol. 43, no. 7, (Jul. 2011), pp. 1560–1565.


  36. Chmielewska B. et al., “The influence of silane coupling agents on the polymer mortar”, Cement and Concrete Composites, vol. 28, no. 9, (Oct. 2006), pp. 803–810.


  37. Matziaris K. et al., “Impregnation and super-hydrophobicity of coated porous low-fired clay building materials”, in Progress in Organic Coatings, 2011, vol. 72, no. 1–2, pp. 181–192.


  38. Rudawska A., “Selected issues on establishing adhesion bonds - homogeneous and hybrid”, in Monographs - Lublin University of Technology, Lublin, 2013.
  39. European Committee for Standardization, EN 828:2013-05. Adhesives. Determining wettability by means of measuring the contact angle and critical surface tension of solid. CEN: Brussels, Belgium, 2013.
  40. Lugscheider E. and Bobzin K., “The influence on surface free energy of PVD-coatings”, Surface and Coatings Technology, vol. 142, (2001), pp. 755–760.


  41. Baldan A., “Adhesion phenomena in bonded joints”, International Journal of Adhesion and Adhesives, vol. 38, (2012), pp. 95–116.


  42. Vedantam S. and Panchagnula M. V., “Constitutive modeling of contact angle hysteresis”, Journal of Colloid and Interface Science, vol. 321, no. 2, (May 2008), pp. 393–400.


  43. Zielecka M., “Methods of contact angle measurement as a tool for characterization of wettability of polymers”, Polimery-W, vol. 49, (2004), pp. 327–332.
  44. Żenkiewicz M. et al., “Contact angle and surface free energy of electron-beam irradiated polymer composites”, Polimery-W, vol. 53, (2008), pp. 446–451.
  45. Shang J. et al., “Comparison of different methods to measure contact angles of soil colloids”, Journal of Colloid and Interface Science, vol. 328, no. 2, (Dec. 2008), pp. 299–307.


  46. Klein N. S. et al., “Evaluation of the wettability of mortar component granular materials through contact angle measurements”, Cement and Concrete Research, vol. 42, no. 12, (2012), pp. 1611–1620.


  47. European Committee for Standardization., EN 206+A1:2016-12. Concrete – Part 1: Specification, performance, production and conformity. CEN: Brussels, Belgium, 2016.
  48. Polish Committee for Standardization, PN-B-06265:2004. National supplements PN-EN 206-1:2003 Concrete - Part 1: Specification, performance, production and conformity. PKN: Warsaw, Poland.
  49. European Committee for Standardization., EN 197-1:2012. Cement—Part 1: Composition, Specifications and Conformity Criteria for Common Cements; CEN: Brussels, Belgium, 2012.
  50. Polish Committee for Standardization. and European Committee for Standardization, EN 1936:2010. Natural stone test methods - Determination of real density and apparent density, and of total and open porosity. PKN: Warsaw, Poland, 2010.
  51. Polish Committee for Standardization, PN-EN 1389:2005. Polish National Supplement: PN-EN 206-1:2003 Concrete. Specification, performance, production and conformity. PKN: Warsaw, Poland, 2005.
  52. European Committee for Standardization, EN 12390-7:2019. Testing hardened concrete. Density of hardened concrete. CEN: Brussels, Belgium, 2019.
  53. European Committee for Standardization, EN 12390-3:2019. Testing hardened concrete - Part 3: Compressive strength of test specimens. CEN: Brussels, Belgium, 2019.
  54. Polish Committee for Standardization and Polish Committee for Standardization., PN-B-06250:1988. Ordinary concrete (In Polish). PKN: Warsaw, Poland, 1988.
  55. Rudawska A. and Jacniacka E., “Analysis for determining surface free energy uncertainty by the Owen-Wendt method”, International Journal of Adhesion and Adhesives, vol. 29, no. 4, (Jun. 2009), pp. 451–457.


  56. Thalmaier G. et al., “Influence of sawdust particle size on fired clay brick properties”, Materiales de Construcción, vol. 70, no. 338, (Mar. 2020), p. 215.


  57. Md Noor N. et al., “Compressive strength, flexural strength and water absorption of concrete containing palm oil kernel shell”, in IOP Conf. Series: Materials Science and Engineering 271, 2017.


  58. Castro J. et al., “Effect of sample conditioning on the water absorption of concrete”, Cement and Concrete Composites, vol. 33, no. 8, (Sep. 2011), pp. 805–813.


  59. Szafraniec M. et al., “Surface Modification of Lightweight Mortars by Nanopolymers to Improve Their Water-Repellency and Durability”, Materials, vol. 13, no. 6, (Mar. 2020), p. 1350.


  60. Suchorab Z. et al., “Mechanical and physical properties of hydrophobized lightweight aggregate concrete with sewage sludge”, Materials, vol. 9, no. 5, (Apr. 2016), pp. 1–18.


  61. Barnat-Hunek, Danuta / Siddique, Rafat / Łagód, Grzegorz (2017): Properties of hydrophobised lightweight mortars with expanded cork. Dans: Construction and Building Materials, v. 155 (novembre 2017).


  62. Qu, Z. Y. / Yu, Q. L. (2018): Synthesizing super-hydrophobic ground granulated blast furnace slag to enhance the transport property of lightweight aggregate concrete. Dans: Construction and Building Materials, v. 191 (décembre 2018).


  63. Barnat-Hunek D. et al., “Evaluation of the Contact Angle of Hydrophobised Lightweight-Aggregate Concrete with Sewage Sludge”, Ecological Chemistry and Engineering S, vol. 22, no. 4, (Jan. 2015), pp. 625–635.


  64. Lei, Lulu / Wang, Qing / Xu, Shuangshuang / Wang, Ning / Zheng, Xu (2020): Fabrication of superhydrophobic concrete used in marine environment with anti-corrosion and stable mechanical properties. Dans: Construction and Building Materials, v. 251 (août 2020).


  65. Fic S. and Szewczak A., “Hydrophobisation effectiveness of building ceramics, polymeric inorganic ultrasound integrated with the addition of fillers”, Budownictwo i Architektura, vol. 14, no. 4, (Dec. 2015), pp. 019–027.


  66. Yoon, Hyun-Sub / Lim, Tae-Kyung / Jeong, Sang-Mi / Yang, Keun-Hyeok (2020): Thermal transfer and moisture resistances of nano-aerogel-embedded foam concrete. Dans: Construction and Building Materials, v. 236 (mars 2020).


  67. She, Wei / Yang, Jingxian / Hong, Jinxiang / Sun, Dewen / Mu, Song (2020): Superhydrophobic concrete with enhanced mechanical robustness: Nanohybrid composites, strengthen mechanism and durability evaluation. Dans: Construction and Building Materials, v. 247 (juin 2020).


  68. Franczak-Balmas D., “Analiza wpływu szorstkości powierzchni styku jako parametru kształtującego nośność styku zespolonych elementów betonowych”, Budownictwo i Architektura, vol. 16, no. 3, (Dec. 2017), pp. 125–134.



  • Informations
    sur cette fiche
  • Reference-ID
  • Publié(e) le:
  • Modifié(e) le: