0
  • DE
  • EN
  • FR
  • Base de données et galerie internationale d'ouvrages d'art et du génie civil

Publicité

An Evaluation Method for Effective Prestress of Simply Supported Prestressed Concrete Beams with Breathing Cracks

Auteur(s):




Médium: article de revue
Langue(s): anglais
Publié dans: Advances in Civil Engineering, , v. 2021
Page(s): 1-14
DOI: 10.1155/2021/8876093
Abstrait:

Loss of effective prestress and accurate detection of actual stress in existing precast prestressed concrete bridges are two major challenges in the bridge industry. In this respect, this research aims at an improved method for the critical decompression moment (DM) test of cracked sections depending on the stress change rate of tensile rebars. A calculation method for total effective prestress of prestressing strands in the tensile region is derived with the assumption of the plane section and pre-decompression elastomer. The proposed method is verified by laboratory tests on beams and numerical analysis and by addressing effective prestress issues of existing simply supported beams. The determination results of the critical decompression state show that the proposed method (i.e., the stress change rate of tensile rebars-load curve) is more sensitive and reasonable than the traditional stress increment, i.e., load curve method. The evaluation results of the total effective prestress are more reasonable than the traditional method based on the steel stress relief hole technique or frequency test results. Compared with the existing methods for estimating the prestress using the mid-span deflection or crack width, the proposed method is more reasonable in theory and calculation. It provides a guide for the evaluation and reinforcement of aging bridges.

Copyright: © Wenlong Guo et al.
License:

Cette oeuvre a été publiée sous la license Creative Commons Attribution 4.0 (CC-BY 4.0). Il est autorisé de partager et adapter l'oeuvre tant que l'auteur est crédité et la license est indiquée (avec le lien ci-dessus). Vous devez aussi indiquer si des changements on été fait vis-à-vis de l'original.

  • Informations
    sur cette fiche
  • Reference-ID
    10541163
  • Publié(e) le:
    09.01.2021
  • Modifié(e) le:
    02.06.2021
 
Structurae coopère avec
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine