0
  • DE
  • EN
  • FR
  • Base de données et galerie internationale d'ouvrages d'art et du génie civil

Publicité

Effects of Particle Shapes and Sizes on the Minimum Void Ratios of Sand

Auteur(s):


Médium: article de revue
Langue(s): anglais
Publié dans: Advances in Civil Engineering, , v. 2019
Page(s): 1-12
DOI: 10.1155/2019/5732656
Abstrait:

The minimum void ratio is an important parameter for evaluating soil properties. It is closely related to the compressive properties, permeability, and shear strength of soil, and it is affected by particle size distributions and particle shapes. However, existing research generally focuses on modeling the minimum void ratio with the effect of particle size distributions, ignoring the influences of particle shapes on the minimum void ratio. This paper analyzes the influences of particle size distributions and particle shapes on the minimum void ratio using four types of sand and alternative materials. The experiments showed that the minimum void ratio first decreased and then increased with the increase of the fines content. The minimum void ratio reached a minimum value when the proportion of fines content was approximately 40%. The more irregular the particle shapes, the more complicated the contact between particles, the more the void existed between the particles, and the larger the minimum void ratio. Based on the experimental data, a relational model between the minimum value of the minimum void ratio and the particle sizes ratio was derived with binary mixtures of different particle sizes and shapes. This proposed model required only one parameterT, which was closely related to the sphericity of the particles, to predict the minimum value of the minimum void ratio with various fines contents. The experiment results showed that the predicted value was very close to the actual measured value.

Copyright: © 2019 Zhaoyang Xu et al.
License:

Cette oeuvre a été publiée sous la license Creative Commons Attribution 4.0 (CC-BY 4.0). Il est autorisé de partager et adapter l'oeuvre tant que l'auteur est crédité et la license est indiquée (avec le lien ci-dessus). Vous devez aussi indiquer si des changements on été fait vis-à-vis de l'original.

  • Informations
    sur cette fiche
  • Reference-ID
    10311719
  • Publié(e) le:
    17.04.2019
  • Modifié(e) le:
    02.06.2021
 
Structurae coopère avec
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine