0
  • DE
  • EN
  • FR
  • Base de données et galerie internationale d'ouvrages d'art et du génie civil

Publicité

Effect of Self-Filtering Layer on Tailings–Steel Wire Mesh Interfacial Shearing Properties and Bearing Behavior of Drain Pipes

Auteur(s):



Médium: article de revue
Langue(s): anglais
Publié dans: Buildings, , n. 8, v. 14
Page(s): 2554
DOI: 10.3390/buildings14082554
Abstrait:

The drain pipe wrapped in steel wire mesh serves a dual purpose of drainage and reinforcement in tailings pond projects. The self-filtering layer that develops upstream of the steel wire mesh influences the reinforcement characteristics of the drainage pipe. This study first conducts interfacial shearing experiments to explore the impact of the self-filtering layer on the shearing properties between tailings and the steel wire mesh. An exponential interface constitutive model is then proposed to delineate the shear stress–displacement relationship. Finally, through finite element simulations, the study assesses the effect of the self-filtering layer on the load-bearing behavior of the drain pipe, considering the interactive dynamics between the tailings and the steel wire mesh. The results reveal that the interfacial shear strength, across varying median particle sizes of the self-filtering layer, adheres to Mohr–Coulomb strength theory. Specifically, as the median particle size of the self-filtering layer increases, interfacial cohesion diminishes while the friction coefficient rises. The initial shear stiffness demonstrates a linear increase with the median particle size. With the presence of the self-filtering layer, the pull-out resistance of the drainage pipe can be enhanced by up to 26%. Moreover, the self-filtering layer significantly affects the distribution of negative skin friction. This research enhances the safety assessment of tailings ponds by providing crucial insights and solutions, emphasizing the influence of the self-filtering layer on the bearing behavior of the drain pipe.

Copyright: © 2024 by the authors; licensee MDPI, Basel, Switzerland.
License:

Cette oeuvre a été publiée sous la license Creative Commons Attribution 4.0 (CC-BY 4.0). Il est autorisé de partager et adapter l'oeuvre tant que l'auteur est crédité et la license est indiquée (avec le lien ci-dessus). Vous devez aussi indiquer si des changements on été fait vis-à-vis de l'original.

  • Informations
    sur cette fiche
  • Reference-ID
    10794950
  • Publié(e) le:
    01.09.2024
  • Modifié(e) le:
    01.09.2024
 
Structurae coopère avec
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine