The Effect of Sand Type on the Rheological Properties of Self-Compacting Mortar

In order to understand the effect of sand type on the rheological properties of self-compacting mortar, four varieties of sand, namely, quartz sand (QS), river sand (RS), and two kinds of manufactured sand, marked as MS-A and MS-B, were studied. As part of this study, the sands’ particle shape parameters, such as their length:width ratio and roundness, were determined. Mortars containing the four varieties of sand were tested using the slump flow test and the V-funnel test in oven-dried (OD) and saturated surface-dried (SSD) conditions in order to identify the water absorption, shape-related differences, and specific gravity in their rheological performance. The changing trends of the slump flows and the V-funnel times of the different mortars in OD and SSD were similar. By eliminating the influence of water absorption on mortar rheology, shape–weight parameters, such as the ratio between the length:width ratio and specific gravity (LWS) and the product of roundness and specific gravity (ROS), were defined in order to quantify the compound effects of sand type on mortar rheology. The regression analysis showed an excellent linear correlation between slump flow and both LWS and ROS, and a very good linear correlation was also demonstrated between the V-funnel time and both LWS and ROS. Based on the particle shape–weight parameters, the rheological properties of mortars can be predicted. Based on the mortar rheological threshold theory, the self-compacting mortar (SCM) zone can be drawn. The predicted SCM zone overlaps considerably with the experimental SCM zone for MS-A.

Cette oeuvre a été publiée sous la license Creative Commons Attribution 4.0 (CC-BY 4.0). Il est autorisé de partager et adapter l'oeuvre tant que l'auteur est crédité et la license est indiquée (avec le lien ci-dessus). Vous devez aussi indiquer si des changements on été fait vis-à-vis de l'original.