0
  • DE
  • EN
  • FR
  • Base de données et galerie internationale d'ouvrages d'art et du génie civil

Publicité

Effect of Lap Splices on Flexural Resistance and Cyclic Deformation Capacity of RC Members

Auteur(s):

Médium: article de revue
Langue(s): anglais
Publié dans: Beton- und Stahlbetonbau, , v. 102
Page(s): 51-59
DOI: 10.1002/best.200710105
Abstrait:

Short lap splices in vertical members are a typical and critical deficiency in existing structures in seismic zones, especially when the splice is located at the bottom end of the member, i. e., in the plastic hinge region. Wrapping the lap-splice region of the member with fibre-reinforced-polymers (FRP) is becoming the method of choice for remedying this deficiency. Test results from the international literature are used in the paper to develop simple rules for the calculation of the flexural resistance and of the yielding or ultimate deformations of concrete members of various cross-sectional shapes, as these affected by short lap-splicing in the plastic hinge region and by FRP wrapping of the length of the member with deficient lapping.

Disponible chez: Voir chez l'éditeur
Structurae ne peut pas vous offrir cette publication en texte intégral pour l'instant. Le texte intégral est accessible chez l'éditeur. DOI: 10.1002/best.200710105.
  • Informations
    sur cette fiche
  • Reference-ID
    10030622
  • Publié(e) le:
    04.03.2008
  • Modifié(e) le:
    15.08.2014
 
Structurae coopère avec
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine