• DE
  • EN
  • FR
  • Base de données et galerie internationale d'ouvrages d'art et du génie civil

Publicité

Effect of Hydrothermal Coupling on Physical and Dynamic Mechanical Properties of Sandstone

Auteur(s):

Médium: article de revue
Langue(s): en 
Publié dans: Advances in Civil Engineering, , v. 2019
Page(s): 1-14
DOI: 10.1155/2019/7318768
Abstrait:

Split-Hopkinson pressure bar (SHPB) tests were conducted for sandstone after recurrent heat-cool (H-C) cycles. Physical and mechanical properties, damage, and fracture characteristics of sandstone after the H-C cycle were explored. Additionally, the damage variable and release rate of damage strain were defined to describe the damage degree of the sandstone specimen after recurrent H-C cycles. Finally, the relationship between mass fractal dimension of fragmentation and cycling number was discussed. Results show that the P-wave velocity and density decrease with the increase of cycling number, while the porosity increases. It was found that the dynamic compressive strength and relative elastic modulus decrease with the increase of cycling number. 20 cycles is the critical point for the low temperature (L-T) group and moderate temperature (M-T) group, while it is 4 cycles for the high temperature (H-T) group. With the increase of cycling number, both the damage variable and release rate of damage strain of rock increase, while the destruction degree of sandstone becomes greater, and the corresponding fragments show more evenly.

Copyright: © 2019 Rong-rong Zhang et al.
License:

Cette oeuvre a été publiée sous la license Creative Commons Attribution 4.0 (CC-BY 4.0). Il est autorisé de partager et adapter l'oeuvre tant que l'auteur est crédité et la license est indiquée (avec le lien ci-dessus). Vous devez aussi indiquer si des changements on été fait vis-à-vis de l'original.

  • Informations
    sur cette fiche
  • Reference-ID
    10311075
  • Publié(e) le:
    04.04.2019
  • Modifié(e) le:
    11.07.2019