Effect of Hybrid Steel-Basalt Fiber on Behaviors of Manufactured Sand RPC and Fiber Content Optimization Using Center Composite Design

The mechanical properties and workability of manufactured sand reactive powder concrete (RPC) mixed with steel and basalt fibers were studied using the response surface method. The central composite design was used to explore the 7-day and 28-day compressive strength, flexural strength, and workability of different amounts of mixed fiber-manufactured sand RPC. Results showed that when the steel fiber content was less than 2.5%, mixing basalt fibers can significantly improve the flexural strength and flexural-compressive ratio of RPC. The relationship equations of the two fibers with the 28-day compressive strength, flexural strength, and flexural-compressive ratio of the manufactured sand RPC were obtained through the response surface model. The model proved to be reliable according to the analysis of variance. The content of the two fibers was optimized by multiobjective optimization technology, and the optimal content of the mixed fiber-manufactured sand RPC under standard curing conditions was verified.

Cette oeuvre a été publiée sous la license Creative Commons Attribution 4.0 (CC-BY 4.0). Il est autorisé de partager et adapter l'oeuvre tant que l'auteur est crédité et la license est indiquée (avec le lien ci-dessus). Vous devez aussi indiquer si des changements on été fait vis-à-vis de l'original.