The Effect of Distance between Sheet Pile and Foundation on Bearing Capacity of Foundation

In this study, the presence of a foundation near the sheet pile wall built on sand soil was simulated in the laboratory, similar to the field conditions. For this purpose, laboratory tests of sheet pile wall (SPW) (defo) and bearing capacity (qult) of the foundation were carried out by applying vertical loads to the steel model foundation. Besides, laboratory tests were represented by the Mohr-Coulomb material model under 3D plane deformation conditions, and numerical analyses were performed. These studies were performed by varying the distance among the SPW, the foundation (L), and the penetration depth of SPW (Hp). The results demonstrated that L had a greater effect on qult and δmax than the Hp. When L was kept constant and Hp was increased, it was seen that qult increased and δmax decreased. Moreover, the raise in L has resulted in an increment in the qult and δmax decreased. In addition, a good agreement between numerical analysis and experimental test was observed.

Cette oeuvre a été publiée sous la license Creative Commons Attribution 4.0 (CC-BY 4.0). Il est autorisé de partager et adapter l'oeuvre tant que l'auteur est crédité et la license est indiquée (avec le lien ci-dessus). Vous devez aussi indiquer si des changements on été fait vis-à-vis de l'original.