Economical Design Comparison of Large-Span Composite Floor Systems with I Beams and Corrugated Web Beams

A comparative study of composite floor systems with I-beams and corrugated web beams is performed based on non-linear programming (NLP) algorithm. The optimization is conducted to find the most economical design with minimum steel consumption considering variables associated with the cross-sectional dimensions and multiple constraints from standards, specifications and engineering practices. Various parameters of live loads ranging from 2 to 10 kN/m² and spans ranging from 20 to 100 m are considered. The optimization results reveal that composite floors with corrugated web beams have reasonable and economical cross-sections with less steel consumption, owing to the high performance of the corrugated web in shear resistance and stability. Further comparative studies show that composite floors with corrugated web beams are economically competitive for spans larger than 30 m with a steel saving of 20–60%, and composite floors with welded I-beams can be applicable for spans less than 30 m considering the simpler configuration and construction. In addition, a spatially structured cable-supported steel–concrete composite floor system is proposed and recommended for super-large-span floor structures considering the cost-effectiveness of the analyzed floor systems reduces as the span further increases.

Cette oeuvre a été publiée sous la license Creative Commons Attribution 4.0 (CC-BY 4.0). Il est autorisé de partager et adapter l'oeuvre tant que l'auteur est crédité et la license est indiquée (avec le lien ci-dessus). Vous devez aussi indiquer si des changements on été fait vis-à-vis de l'original.