0
  • DE
  • EN
  • FR
  • Base de données et galerie internationale d'ouvrages d'art et du génie civil

Publicité

Dynamic Behavior of RC Columns Confined with Micro-Expansive Concrete-Filled Steel Tubes Subjected to Lateral Low-Velocity Impact: Experimental and Numerical Study

Auteur(s):
ORCID

ORCID



Médium: article de revue
Langue(s): anglais
Publié dans: Buildings, , n. 5, v. 12
Page(s): 515
DOI: 10.3390/buildings12050515
Abstrait:

In order to improve the anti-collision capacity of existing reinforced concrete (RC) columns under vehicle impact load, an experimental study on the anti-collision performance of RC columns strengthened with micro-expansive concrete filled steel tube was carried out. By combining an experiment and finite element calculation, the influence of steel tube strength, micro-expansive concrete strength and steel tube wall thickness on the anti-collision performance of strengthened RC columns were studied. The results showed that the peak displacement of an SM-RC column is 25.9% lower than that of an RC column, due to the increased stiffness, the peak impact force increased by 138.2%. The micro-expansive concrete filled steel tube reinforcement method can significantly improve the anti-collision performance of RC columns and reduce the lateral deformation. Increasing the strength grade of steel tube and thickness of steel tube can greatly improve the impact resistance of strengthened RC columns and reduce the lateral deflection deformation of short columns, compared with steel tube strength Q235, the displacement of Q690 is reduced 47.4%. the displacement of the 8-mm thick steel tube is reduced by 48.1% compared with the 4-mm one. while the strength grade of micro-expansive concrete has little effect on the impact resistance and lateral deflection deformation of strengthened RC columns.

Copyright: © 2022 by the authors; licensee MDPI, Basel, Switzerland.
License:

Cette oeuvre a été publiée sous la license Creative Commons Attribution 4.0 (CC-BY 4.0). Il est autorisé de partager et adapter l'oeuvre tant que l'auteur est crédité et la license est indiquée (avec le lien ci-dessus). Vous devez aussi indiquer si des changements on été fait vis-à-vis de l'original.

  • Informations
    sur cette fiche
  • Reference-ID
    10664419
  • Publié(e) le:
    09.05.2022
  • Modifié(e) le:
    01.06.2022
 
Structurae coopère avec
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine