0
  • DE
  • EN
  • FR
  • Base de données et galerie internationale d'ouvrages d'art et du génie civil

Publicité

Diffuseness Quantification in a Reverberation Chamber and Its Variation with Fine-Resolution Measurements

Auteur(s):
ORCID
Médium: article de revue
Langue(s): anglais
Publié dans: Buildings, , n. 11, v. 11
Page(s): 519
DOI: 10.3390/buildings11110519
Abstrait:

Insufficient diffuseness is the major cause of the poor repeatability and reproducibility of building acoustical measurements in a reverberation chamber. Inaccurate results were reported for the prevailing methods in ISO and ASTM standards. Many previous studies, thus, have proposed new methods to quantify the diffuseness of a reverberation chamber more accurately, but there is no general agreement among researchers on the most reliable method. The number of measurement samples required for these diffuseness metrics is also unclear, even though it significantly impacts the robustness of the methods. This study, therefore, aims to compare the performance of the two widely used diffuseness metrics (spatial variation of sound pressure levels and the relative standard deviation of decay rates) in the standards and the recently introduced metric (degree of time series fluctuation). The measurements were carried out with fine resolution microphone positions and varied configurations of acoustic diffusers. The degree of time series fluctuation showed the best correlation with varying diffuser configurations in the low-frequency range. Confidence intervals and coefficients of variation of the three metrics by random sampling also indicated that DTF is more reliable for evaluating the diffuseness in a sound field as it is less influenced by the number of sampling.

Copyright: © 2021 by the authors; licensee MDPI, Basel, Switzerland.
License:

Cette oeuvre a été publiée sous la license Creative Commons Attribution 4.0 (CC-BY 4.0). Il est autorisé de partager et adapter l'oeuvre tant que l'auteur est crédité et la license est indiquée (avec le lien ci-dessus). Vous devez aussi indiquer si des changements on été fait vis-à-vis de l'original.

  • Informations
    sur cette fiche
  • Reference-ID
    10639455
  • Publié(e) le:
    30.11.2021
  • Modifié(e) le:
    02.12.2021
 
Structurae coopère avec
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine