Development of The Experimental Stand With Centrally Located Specimen For The Investigation of Heat and Moisture Phenomena in Porous Building Materials
| Auteur(s): |
Łukasz Cieślikiewicz
(Warsaw University of Technology , Warsaw , Poland)
Michał Wasik (Warsaw University of Technology , Warsaw , Poland) Michał Kubiś (Warsaw University of Technology , Warsaw , Poland) Piotr Łapka (Warsaw University of Technology , Warsaw , Poland) Marcin Bugaj (Warsaw University of Technology , Warsaw , Poland) Karol Pietrak (Warsaw University of Technology , Warsaw , Poland) Tomasz S. Wiśniewski (Warsaw University of Technology , Warsaw , Poland) Piotr Furmański (Warsaw University of Technology , Warsaw , Poland) Mirosław Seredyński (Warsaw University of Technology , Warsaw , Poland) |
|---|---|
| Médium: | article de revue |
| Langue(s): | anglais |
| Publié dans: | Civil and Environmental Engineering Reports, mars 2019, n. 1, v. 29 |
| Page(s): | 53-65 |
| DOI: | 10.2478/ceer-2019-0005 |
| Abstrait: |
The paper presents development of an experimental stand with centrally located specimen for the investigation of heating and drying processes in porous building materials. Additionally, the paper contains preliminary results of measurements which test and verify the assumed operation conditions of the stand. In order to control parameters of air which was used to heat and dry the specimen, the stand was operating in a closed loop and was equipped with several elements, i.e., the cooler (humidity condenser), fan with variable rotation speed, humidifier and heater. Moreover, the stand consisted of two square and parallel ducts with air streams which had identical parameters. This allowed for two measurements at the same time. |
- Informations
sur cette fiche - Reference-ID
10705206 - Publié(e) le:
19.02.2023 - Modifié(e) le:
19.02.2023
Structurae coopère avec
